Sage Journals: Discover world-class research

Retricted access

Research article

First published 2013-4

Simulation on the vibration characteristics of elliptical gears

Xing Liu, Kazuteru Nagamura, Kiyotaka Ikejo

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2020-10

Parametric vibrations and instabilities of an elliptical gear pair

Nan Gao, Chanannipat Meesap, Shiyu Wang [...]

Journal of Vibration and Control

Open access

Research article

First published 2017-12

Mathematical modeling and experimental verification of a novel single-actuated ultrasonic elliptical vibrator

Zhen Yin, Yucan Fu, Hua Li [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2012-5

Correcting distortion and rotation direction of an elliptical trajectory in elliptical vibration cutting by modulating phase and relative magnitude of the sinusoidal excitation voltages

Byoung Gook Loh, Gi Dae Kim

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2020-10

The influence of ultrasonic elliptical vibration amplitude on cutting tool flank wear

Mohsen Khajehzadeh, Omid Boostanipour, Soheil Amiri [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2017-6

Elliptical ultrasonic–assisted turning tool with longitudinal and bending vibration modes

Saeid Amini, MR Khosrojerdi, Reza Nosouhi

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2024-5

Locus control based on microtexturing model in the elliptical vibration-assisted turning

Chen Zhang, Zixuan Wang

Journal of Micromanufacturing

Retricted access

Research article

First published 2018-8

FE simulation of linear and elliptical ultrasonic vibrations in turning of Inconel 718

Mohammad Lotfi, Saeid Amini

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2019-2

A novel three-dimensional elliptical vibration cutting device based on the freedom and constraint topologies theory

Sheng Lin, Xi Kong, Chun Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2014-6

Experimental and analytical study of the elliptical vibration-assisted turning process with the dynamic friction model

Reza Nosouhi, Saeed Behbahani, Saeed Amini [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results