Sage Journals: Discover world-class research

Open access

Research article

First published 2024-6

Ultrasonic wave simulation in shrink-fit assembly for the estimation of stress at the contact interference

Abdelmounaime Belmessous, Hamid Boutoutaou

Advances in Mechanical Engineering

Retricted access

Research article

First published 2021-11

Mechanical analysis of shrink-fitted thick FG cylinders based on first order shear deformation theory and FE simulation

Mohammad Reza Salehi Kolahi, Hossein Rahmani, Hossein Moeinkhah

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2020-10

Simulation study on modified coil configuration used for shrink fitting of semi-built-up crankshaft and parameters influencing the thermal distribution

Jianguo Duan, Qinglei Zhang, Xintao Long [...]

Science Progress

Retricted access

Research article

First published 2011-2

Finite-element modelling of two-disc shrink fit assembly and an evaluation of material pairs of discs

F Ozturk

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2019-4

Influence of radial interference on torque capacity of shrink-fit camshaft

Jiao Zhao, Jun-Xiong Wang, Chao Yu [...]

Advances in Mechanical Engineering

Open access

Research article

First published 2018-6

Shrink-fitted joint behavior using three-dimensional solid finite elements in rotor dynamics with inclusion of stress-stiffening effect

Eerik Sikanen, Janne E Heikkinen, Jussi Sopanen

Advances in Mechanical Engineering

Retricted access

Research article

First published 2015-2

Theoretical and experimental studies for wind turbine’s shrink disk

Wang Jianmei, Kang Jianfeng, Tang Liang

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2022-7

Effect of form defect on pipe surfaces subjected to pressure at the assembly point

Allal Bedlaoui, Hamid Boutoutaou

Advances in Mechanical Engineering

Retricted access

Research article

First published 2022-5

Torque capacity of the multilayer interference fit based on a friction coefficient prediction model

Ke Ning, Jianmei Wang, Dan Xiang [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Free access

Research article

First published 2014-5

Coupled thermal/structural contact analyses of shrink-fit tool holder

Mehmet Ali Arslan

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results