Sage Journals: Discover world-class research

Free access

Research article

First published 2017-12

Study on the formation mechanism of saw-tooth chip in high-speed cutting process

Jin-quan Li, Pei Li, Hai-lin Guo [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2024-10

A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment

Tran Minh Duc, Tran Bao Ngoc, Ngo Minh Tuan [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2001-11

Study on acoustic emission in machining hardened steels Part 1: Acoustic emission during saw-tooth chip formation

J Barry, G Byrne

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2024-6

Finite element modeling of high-speed orthogonal cutting: A contribution to understanding the influence of mesh parameters on saw-toothed chip formation

Mehmet Aydın

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2019-5

A smooth particle hydrodynamic model for two-dimensional numerical simulation of Ti–6Al–4V serrated chip deformation based on TANH constitutive law

Weilong Niu, Rong Mo, Huibin Sun [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2019-3

Modeling of burr thickness in micro-end milling of Ti6Al4V

Vipindas Kizhakken, Jose Mathew

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2018-5

Evaluation of micro-features of chips of Inconel 825 during dry turning with uncoated and chemical vapour deposition multilayer coated tools

A Thakur, S Gangopadhyay

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1986-9

Modelling the Catastrophic Shear Type of Chip When Machining Stainless Steel

B M Manyindo, P L B Oxley

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2017-7

Effect of cutting speed on chip formation and wear mechanisms of coated carbide tools when ultra-high-speed face milling titanium alloy Ti-6Al-4V

Anhai Li, Jun Zhao, Guanming Hou

Advances in Mechanical Engineering

Retricted access

Research article

First published 2026

Investigation on flank wear,surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication

Somyajit Swain, Soumikh Roy, Anshuman Das [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results