Search results: Sage Journals

Free accessResearch articleFirst published March, 2024

Performance analysis of twin-layer AlTiN and TiCN coated inserts during high speed turning of SS304 with synthetic coolant at 0°C

Pravin Patil, Prasad Karande

Tribology - Materials,Surfaces & Interfaces

Restricted accessResearch articleFirst published December, 2023

Effectiveness of synthetic coolant at 0°C on machining of SS304 with PVD coated TiCN tool to evaluate and compare tool wear and surface finish with conventional machining method

Pravin Patil, Prasad Karande

Tribology - Materials,Surfaces & Interfaces

Restricted accessResearch articleFirst published October, 2022

Machinability Study on CNC Turning of Stainless Steel 303 with CVD Multi-Layer (TiN/Al 2 O 3 /TiCN) Coated Carbide Insert by using Grey-Fuzzy Logic Approach

SR Sundara Bharathi, D Ravindran, A Arul Marcel Moshi [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free accessResearch articleFirst published May, 2022

Wear performance of indexable coated inserts cutting 0Cr17Ni4Cu4Nb stainless steel

Xiaolan Han, Zhanfeng Liu, Yazhou Feng

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free accessResearch articleFirst published May, 2018

The effect of monolayer TiCN-,AlTiN-,TiAlN-and two layers TiCN + TiN- and AlTiN + TiN-coated cutting tools on tool wear,cutting force,surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloy

Emel Kuram

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free accessResearch articleFirst published June, 2012

Critical design factors for multi-layer coating systems that influence heat partition in the secondary shear deformation zone and machining performance

Muhammad Fahad, Paul T Mativenga, Mohammad A Sheikh

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Restricted accessResearch articleFirst published March, 2019

The study on the properties of TiC x N 1− x coatings processed by cathodic arc physical vapour deposition

Ping Chuan Siow, Jaharah A. Ghani, Muhammad Rizal [...]

Tribology - Materials,Surfaces & Interfaces

Restricted accessResearch articleFirst published October, 2024

Cutting performance of coated carbide inserts in hard turning of hardened AISI D2 cold work tool steels

Ahmet Cakan, Onder Albayrak, Bengi Gozmen Sanli [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free accessResearch articleFirst published September, 2014

Experimental investigations to optimise and compare the machining performance of different coated carbide inserts during turning hardened steel

Satish Chinchanikar, Sounak K Choudhury

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open accessResearch articleFirst published May, 2024

Tool life and wear mechanisms of CVD coated and uncoated SiAlON ceramic milling inserts when machining aged Inconel 718

Luke Osmond, Ian Cook, David Curtis [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free accessResearch articleFirst published March, 2024

Performance analysis of twin-layer AlTiN and TiCN coated inserts during high speed turning of SS304 with synthetic coolant at 0°C

Pravin Patil, Prasad Karande

Tribology - Materials,Surfaces & Interfaces

Restricted accessResearch articleFirst published December, 2023

Effectiveness of synthetic coolant at 0°C on machining of SS304 with PVD coated TiCN tool to evaluate and compare tool wear and surface finish with conventional machining method

Pravin Patil, Prasad Karande

Tribology - Materials,Surfaces & Interfaces

Restricted accessResearch articleFirst published October, 2022

Machinability Study on CNC Turning of Stainless Steel 303 with CVD Multi-Layer (TiN/Al 2 O 3 /TiCN) Coated Carbide Insert by using Grey-Fuzzy Logic Approach

SR Sundara Bharathi, D Ravindran, A Arul Marcel Moshi [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free accessResearch articleFirst published May, 2022

Wear performance of indexable coated inserts cutting 0Cr17Ni4Cu4Nb stainless steel

Xiaolan Han, Zhanfeng Liu, Yazhou Feng

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free accessResearch articleFirst published May, 2018

The effect of monolayer TiCN-,AlTiN-,TiAlN-and two layers TiCN + TiN- and AlTiN + TiN-coated cutting tools on tool wear,cutting force,surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloy

Emel Kuram

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free accessResearch articleFirst published June, 2012

Critical design factors for multi-layer coating systems that influence heat partition in the secondary shear deformation zone and machining performance

Muhammad Fahad, Paul T Mativenga, Mohammad A Sheikh

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Restricted accessResearch articleFirst published March, 2019

The study on the properties of TiC x N 1− x coatings processed by cathodic arc physical vapour deposition

Ping Chuan Siow, Jaharah A. Ghani, Muhammad Rizal [...]

Tribology - Materials,Surfaces & Interfaces

Restricted accessResearch articleFirst published October, 2024

Cutting performance of coated carbide inserts in hard turning of hardened AISI D2 cold work tool steels

Ahmet Cakan, Onder Albayrak, Bengi Gozmen Sanli [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free accessResearch articleFirst published September, 2014

Experimental investigations to optimise and compare the machining performance of different coated carbide inserts during turning hardened steel

Satish Chinchanikar, Sounak K Choudhury

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open accessResearch articleFirst published May, 2024

Tool life and wear mechanisms of CVD coated and uncoated SiAlON ceramic milling inserts when machining aged Inconel 718

Luke Osmond, Ian Cook, David Curtis [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture