Sage Journals: Discover world-class research

Free access

Research article

First published 2020-2

Parametric study on the tool inclination angle for side milling thin-walled workpiece edges based on finite element simulation

Gongyu Liu, Jiaqiang Dang, Chao Li [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2016-9

Influence of tool inclination angle and cutting direction on long thin-walled part’s dimensional and geometric accuracy when high-speed ball end milling the heat-treated titanium alloy Ti–6Al–4 V

Sarwar Ali Abbasi, Pingfa Feng, Y Ma [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2014-3

Investigation on the chip formation concerning tool inclination angles in ball end milling of H13 die steel

Xiaoxiao Chen, Jun Zhao, Shuai Liu [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2002-6

Wear evaluation of a self-propelled rotary tool when machining titanium alloy IMI 318

E O Ezugwu, K A Olajire, Z M Wang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2017-8

Evaluation of inclined arc trajectory parameters for design and control of 3D directional well

Xiang Wu, Chengli Wang, Weiming Chen [...]

Journal of Computational Methods in Sciences and Engineering

Retricted access

Research article

First published 2001-8

Elastic-plastic finite element analysis for oblique cutting with a discontinuous chip of 6-4 brass

Z-C Lin, Y-Y Lin

The Journal of Strain Analysis for Engineering Design

Open access

Research article

First published 2020-9

An experimental study on the effect of tool geometry on tool wear and surface roughness in hard turning

Pham Minh Duc, Le Hieu Giang, Mai Duc Dai [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2024-10

3D micromechanical modeling of orthogonal hole saw cutting on CFRP composites

Amira Hassouna, Slah Mzali, Salah Mezlini [...]

Journal of Thermoplastic Composite Materials

Free access

Research article

First published 2014-9

Experimental investigations and development of cutting force model for self-propelled rotary face milling cutter in machining of titanium alloy

J John Rozario Jegaraj, CS Raju, K Ramesh Kumar [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2016-9

Local material removal model considering the tool posture in deterministic polishing

Cheng Fan, Ji Zhao, Lei Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results