Sage Journals: Discover world-class research

Retricted access

Research article

First published 2022-8

The effects of punch angle in noise and force formation for sheet metal blanking process

Onur Cavusoglu, Hakan Gurun, Fırat Kafkas [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2017-9

Basic investigation of deterioration on magnetic properties of laminated iron core after welding process

Kohei Kawaguchi, Yasuhito Takahashi, Koji Fujiwara [...]

International Journal of Applied Electromagnetics and Mechanics

Free access

Research article

First published 2012-5

Investigation of thin boron steel sheet formability in hot deep-drawing processes according to process parameters

Min-sik Lee, Seung-cheol Baeck, Chung-gil Kang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2017-9

Effect of punching and water-jet cutting methods on magnetization curve and energy losses of non-oriented magnetic steel sheets

Hanyu Zhao, Enzo Ferrara, Veronica Manescu Paltanea [...]

International Journal of Applied Electromagnetics and Mechanics

Open access

Research article

First published 2018-4

A study of combined finite element method simulation/experiment to predict forming limit curves of steel DP350 sheets

Thi-Bich Mac, Van-Cuong Do, Duc-Toan Nguyen

Advances in Mechanical Engineering

Free access

Research article

First published 2020-1

Combined numerical and experimental study to predict the forming limit curve of boron steel sheets at elevated temperatures

Nguyen Duc-Toan, Kim Young-Suk

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2023-5

The experimental investigation of springback and roughness parameters in the three-point forming process using terpolymer punch

T Arunkumar, M Ravichandran, M Varatharajulu [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2017-1

Hole-flange forming of high-strength steel sheet using one-step hot stamping-forging method

Fang-Sung Cheng

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1990-1

Incorporation of the strain-rate-sensitive constitutive relations in the analysis of sheet metal forming

C H Toh

The Journal of Strain Analysis for Engineering Design

Free access

Research article

First published 2012-4

A novel punch design approach with progressive clearance variation for the punching–broaching process

S F Lajarin, R C B Neto, A M Eto [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results