Sage Journals: Discover world-class research

Retricted access

Research article

First published 2019-5

The effect of manufacturing process induced near-surface deformed layer on the corrosion behaviour of AA2198-T851 Al–Cu–Li alloy

Uyime Donatus, João Victor de Sousa Araujo, Caruline de Souza Carvalho Machado [...]

Corrosion Engineering,Science and Technology: The International Journal of Corrosion Processes and Corrosion Control

Retricted access

Research article

First published 2022-4

The influence of mechanical grinding on the microstructure and corrosion behaviour of A356 aluminium alloys

M. D. Goodall, S. Pawar, M. Curioni [...]

Corrosion Engineering,Science and Technology: The International Journal of Corrosion Processes and Corrosion Control

Retricted access

Research article

First published 2001-3

Microtextural evolution during superplastic deformation of AA 8090 Al–Li alloy

B.P. Kashyap, W. Fan, M.C. Chaturvedi

Materials Science and Technology

Retricted access

Research article

First published 2002-6

Wear of metals: A consequence of stable/unstable material response

S. K. Biswas

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Open access

Research article

First published 2017-10

Surface characterization of Ti1023 alloy shot peened by cast steel and ceramic shot

Daoxia Wu, Changfeng Yao, Dinghua Zhang

Advances in Mechanical Engineering

Retricted access

Research article

First published 2010-1

Near-Surface Pavement Failure under Multiaxial Stress State in Thick Asphalt Pavement

Hao Wang, Imad L. Al-Qadi

Transportation Research Record: Journal of the Transportation Research Board

Open access

Research article

First published 2017-10

Optimal aero-structural design of an adaptive surface for boundary layer motivation using an auxetic lattice skin

Michael GC Garland, Matthew J Santer, Jonathan F Morrison

Journal of Intelligent Material Systems and Structures

Retricted access

Research article

First published 1995-06

Experimental and Numerical Studies of a Laminated Composite Single-Lap Adhesive Joint

M. Y. Tsai, J. Morton, F. L. Matthews

Journal of Composite Materials

Open access

Research article

First published 2016-7

Formation of nanosized grain structure in martensitic 100Cr6 bearing steels upon rolling contact loading studied by atom probe tomography

Y. J. Li, M. Herbig, S. Goto [...]

Materials Science and Technology

Open access

Research article

First published 2021

3-D dynamic simulation of knitwear based on the hybrid model

Sha Sha, Wantong Wei, Bowen Xiao [...]

Journal of Engineered Fibers and Fabrics

Search results