Sage Journals: Discover world-class research

Open access

Research article

First published 2017-6

Influence of scratch type on tensile strength in in situ tensile test

Ning Li, Hongwei Zhao, Mingjun Jin [...]

Advances in Mechanical Engineering

Open access

Research article

First published 2024

In-situ computed tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear test with clinch points

G Reschke, D Köhler, R Kupfer [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Note

First published 2007-4

Determination of mechanical adhesion energy of thermal oxide scales on AISI 430Ti alloy using tensile test

S. Chandra-Ambhorn, F. Roussel-Dherbey, F. Toscan [...]

Materials Science and Technology

Retricted access

Research article

First published 2015-8

Multiphasic stress relaxation response of freshly isolated and cultured vascular smooth muscle cells measured by quasi-in situ tensile test

Kazuaki Nagayama, Shunsuke Saito, Takeo Matsumoto

Bio-Medical Materials and Engineering

Retricted access

Research article

First published 2015-9

Quantification of deformation induced α’-martensite in Fe–19Cr–3Mn–4Ni–0.15C–0.15N austenitic steel by in situ magnetic measurements

M. Hauser, M. Wendler, S. Ghosh Chowdhury [...]

Materials Science and Technology

Open access

Research article

First published 2024-12

In-situ computed tomography analysis of the failure mechanisms of thermomechanically manufactured joints with auxiliary joining element

T Borgert, D Köhler, E. Wiens [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Open access

Research article

First published 2024-5

In-situ microstructural evolution during tensile loading of CoCrFeMnNi high entropy alloy welded joint probed by high energy synchrotron X-ray diffraction

P. Dias, J. G. Lopes, T. Curado [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2016-3

In situ determination of the fiber–matrix interface tensile strength

Kyle R Totten, Bender Kutub, Leif A Carlsson

Journal of Composite Materials

Retricted access

Research article

First published 2014-9

Effect of sulphide exposure on mechanical properties of CuOFP

K. Sipilä, E. Arilahti, T. Lehtikuusi [...]

Corrosion Engineering,Science and Technology: The International Journal of Corrosion Processes and Corrosion Control

Retricted access

Research article

First published 2019-6

Single steel strut mechanical testing: Challenges and future research directions

Ali Can Kaya, Paul Zaslansky, Sebastian Fischer [...]

Materials Science and Technology

Search results