Sage Journals: Discover world-class research

Retricted access

Research article

First published 2023

Characterization of damping in 3D metal printed gear body using parameter optimization

Jingrui Yang, Yihe Zhang, Rui Li [...]

Journal of Vibration and Control

Retricted access

Research article

First published 2025-12

The effect of clearance on gear performance: An optimization study for a light-weight 3D-printed cycloidal drive

Isha Nafisa Quazi, Hanie Nadia Shasmin, Nooranida Arifin [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Open access

Research article

First published 2023-8

Design and characterization of a miniaturized low inertia and low viscous friction magnetorheological clutch using 3D metal printing for human-robot applications

Pierre Lhommeau, Mathieu Lamy, Jean-Sébastien Plante

Journal of Intelligent Material Systems and Structures

Open access

Research article

First published 2024

3D printing applications on textiles: Measurement of air permeability for potential use in stab-proof vests

Dereje Berihun Sitotaw, Dominik Muenks, Abera Kechi Kebash

Journal of Engineered Fibers and Fabrics

Open access

Research article

First published 2018

DUALarm: An open-source and 3D-printable device for upper limb neurorehabilitation

Tito Dinon, Marco Caimmi, Andrea Chiavenna [...]

Journal of Rehabilitation and Assistive Technologies Engineering

Retricted access

Review article

First published 2023-6

A review on materials and performance characteristics of polymer gears

Mohit Jain, Santosh Patil

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2024-11

Effect of powder characteristics on the microstructure and performance of CuSn10 parts by material extrusion 3D printing

Kai Jin, Su Zheng, Gemin Li [...]

Materials Science and Technology

Open access

Research article

First published 2025-03

Investigating thermoplastic-elastomer-based 3D-Printed mesh and honeycomb structures for cycling gloves

Ye-Eun Kim, Dong-Eun Kim

Journal of Industrial Textiles

Open access

Research article

First published 2015-06

Evaluating Tension and Tooth Geometry to Optimize Grip on 3D Printer Filament

Matthew Fiedler

3D Printing and Additive Manufacturing

Retricted access

Research article

First published 2026

Monotonic torsion behaviour of printed polylactic acid -preliminary insight into printing parameters

Julio Varela, Jose Martinez-Trinidad, Manuel Coca-Gonzalez [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Search results