Comparison of material transfer in electrical discharge machining of AISI H13 die steel

Abstract

The electrical discharge machining (EDM) process is extensively used in the tool and die making industry for accurate machining of internal profiles in hardened materials. Although it is essentially a material removal process, efforts have been made in the recent past to use it as surface treatment method. This article investigates and compares the effect of material transfer from electrode bodies (copper, copper—chromium, and copper—tungsten) and tungsten powder suspended in the dielectric medium during die-sinking EDM of AISI H13 die steel. Results show a 76 per cent increase in micro-hardness by machining with a copper—tungsten electrode and a 111 per cent increase by machining with tungsten powder mixed in the dielectric. The copper—chromium electrode gives the best surface roughness (Ra) value of 2.67 μ m. Scanning electron microscopy and X-ray diffraction analysis of the machined surfaces show alloying of parent material with tungsten and tungsten carbide. Chemical composition of the machined surfaces was further checked on an optical emission spectrometer to verify the results. Besides a significant presence of tungsten, an increase in the percentage of carbon is also observed.

Keywords

electrical discharge machining surface improvement AISI H13 hot die steel plasma channel

Get full access to this article

View all access options for this article.

References

Fuller

J. E.

, ‘Electrical discharge machining’ ASM machining handbook (USA: Ohio 2000): 557–564.

Jain

V. K.

, Advanced machining processes (New Delhi: Allied Publishers 2004).

K. H.

Newman

S. T.

, ‘State of the art electrical discharge machining’ Int. J. Mach. Tools Manuf. 43 (2003): 1287–1300.

Shankar

N. U.

Krishnan

, ‘Polarity effect in spark erosion machining’ Indian J. Technol. 17 9 (1979): 363–364.

Altan

Lilly

B. W.

Konig

Tonshoff

H. K.

Luttervelt

C. A.

Khairy

A. B.

, ‘Advanced techniques for die and mould manufacturing’ CIRP Ann. 42 2 (1993): 707–716.

Kuneida

Lauwers

Rajurkar

K. P.

Schumacher

B. M.

, ‘Advancing EDM through fundamental insight into the process’ CIRP Ann. 54 2 (2005): 599–622.

Zolotykh

B. N.

, Modern physical theory of electric erosion of metals - the basis for development of new directions in EDM. In Proceedings of the International Symposium on Electromachining-XI, 1995, pp. 114–116.

Marafona

Wykes

, ‘A new method of optimizing material removal rate using EDM with copper-tungsten electrodes’ Int. J. Mach. Tools Manuf. 40 2 (2000): 153–164.

Aspinwall

D. K.

Dewes

R. C.

Lee

H. G.

Simao

, ‘Electrical discharge surface alloying of Ti and Fe workpieces materials using refractory powder compact electrodes and Cu wire’ CIRP Ann. 52 1 (2003): 151–156.

10.

Lahiri

B. N.

Mukherjee

S. K.

Mullick

B. K.

, ‘Loss of energy in pyrolysis of dielectric in EDM process’ J. Inst. Eng. (India) 62 (1981): 66–69 pt ME2.

11.

Kumar

Singh

T. P.

, ‘Improving the surface properties of OHNS die steel using EDM process’ Manuf. Technol. Today 5 6 (2006): 7–11.

12.

Tzeng

Y. F.

Lee

C. Y.

, ‘Effects of powder characteristics on electro-discharge machining efficiency’ Int. J. Adv. Manuf. Technol. 17 8 (2001): 586–592.

13.

Jeswani

M. L.

, ‘Effect of addition of graphite powder to kerosene used as the dielectric fluid in electrical discharge machining’ Wear 70 (1981): 133–139.

14.

Kansal

H. K.

Singh

Kumar

, ‘Parametric optimization of powder mixed electrical discharge machining by response surface methodology’ J. Mater. Process. Technol. 169 (2005): 427–436.

15.

Rehbein

Schulze

H. P.

Mecke

Wollenberg

Storr

, ‘Influence of selected groups of additives on breakdown in EDM sinking’ J. Mater. Process. Technol. 149 (2004): 58–64.

16.

Mohri

Saito

Tsunekawa

, ‘Metal surface modification by electrical discharge machining with composite electrodes’ CIRP Ann. 42 1 (1993): 219–222.

17.

Kruth

J. P.

, Rapid prototyping, a new application of physical and chemical processes for material accretion manufacturing. In Proceedings of the ISEM-XI, 1995, pp. 3–28.

18.

Roethel

Garbajs

, ‘Contributions to the micro-analysis of spark eroded surfaces’ CIRP Ann. 25 1 (1976): 135–140.

19.

Shunmugam

M. S.

Philip

P. K.

Gangadhar

, ‘Improvement of wear resistance by EDM with tungsten carbide powder metallurgy electrode’ Wear 171 (1994): 1–5.

20.

Dewes

Aspinwall

Simao

Lee

H. G.

, ‘Electrical discharge machining and surface alloying - the process, parameters and state of play’ Mater. World 11 5 (2003): 16–18.

21.

Koshy

Philip

P. K.

Geddam

, Hardening of surface layers using electric discharge techniques. In Proceedings of the 11th AIMTDR Conference, IIT Madras, 1983, pp. 315–319.

22.

Furutani

Saneto

Takezawa

Mohri

Miyake

, ‘Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid’ Precis. Eng. 25 (2001): 138–144.

23.

Furutani

Shimizu

, Experimental analysis of deposition process of lubricant surface by EDM with molybdenum disulphide powder suspended in working oil. In Proceedings of the American Society for Precession Engineering, 2003, vol. 30, pp. 547–550.

24.

Yan

B. H.

Tsai

H. C.

Huang

F. Y.

, ‘The effect in EDM in a dielectric of urea solution in water on modifying the surface of titanium’ Int. J. Mach. Tools Manuf. 45 (2005): 194–200.

25.

Wong

Y. S.

Lim

L. C.

Rahuman

Tee

W. M.

, ‘Near mirror-finish phenomenon in EDM using powder-mixed dielectric’ J. Mater. Process. Technol. 79 (1998): 30–40.

26.

Bai

C. Y.

Koo

C. H.

, ‘Effects of kerosene or distilled water as dielectric on electrical discharge alloying of superalloy Haynes 230 with Al-Mo composite electrode’ Surf. Coat. Technol. 200 (2006): 4127–4135.