Copper wire and polyamide filament were used as the core yarn, and stainless steel wire was used as the wrapping yarn to fabricate the loop yarns for knitting structure. The nonwoven selvedge served as the core yarn, and the conducting wire was used as the wrapping yarn, to fabricate the weft-inlaid yarn. The rotor twister successfully fabricated a series of conductive hybrid yarns (CHYs). The co-woven-knitted machine successfully fabricated the conductive co-woven-knitted fabrics (CWKFs) with various CHYs. The conducting materials of the hybrid yarn were copper wire and stainless steel wire, taken as the wrapping and core yarn, respectively. The conductive co-woven-knitted fabrics were laminated with various angles in four and six layers and then heat pressed to 2 and 3 mm in thickness. This study investigated the surface resistivity, electromagnetic shielding effectiveness (EMSE) and electrostatic discharge (ESD) attenuation percentage of the co-woven-knitted fabrics and CWKFs reinforced composites.
Stuchly, M.A. (1995). Health Effects of Exposure to Electromagnetic Fields, Proceedings of Applications Conference in Aerospace, Vol. 1, pp. 351—368, Aspen, CO.
4.
Williams, T. (1999). The Health Effects of Electromagnetic Radiation, Electromagnetic Compatibility in Heavy Power Installations , IEE Colloquium, 23: 5/1—5/6.
5.
Niehs (1999). NIEHS Report on Health Effects from Exposure to Power-line Frequency Electric and Magnetic Fields, NIEHS, National Institute of Health, NC 27709.
6.
Stuchly, M.A. (1993). Electromagnetic Fields and Health, IEEE Potentials, 12(2): 34—39.
Hoeft, L.O. and Tokarsky E.W. (2000). Measured Electromagnetic Shielding Characteristics of Fabric made from Metal Clad Aramid Yarn and Wire, IEEE International Symposium in EMC, Washington DC, Vol. 2, pp. 883—886, USA.
9.
Barry, C. (1989). Electroless Copper/Nickel Shielding: High-performance Solution to Electromagnetic Interference, Plastic Surface Finishing, 30—33.
10.
Huang, C.Y. and Pai, J.F. (1997). Studies on Processing Parameters and Thermal Stability of ENCF/ABS composites for EMI Shielding , J. Appl. Polym. Sci., 63(1), 115—124.
11.
Diaz, A.F. and Kanazawa K.K. (1979). Electrochemical Polymerization of Pyrrole, J. Chem. Soc. Chem. Commun., 635—637.
12.
Cheng, K.B. , Ramakrishna, S. and Lee , K.C. (2000). Development of Conductive Knitted-fabric-reinforced Thermoplastic Composites for Electromagnetic Shielding Applications, J. Thermoplastic Compo. Mater., 13(5): 378—399.
13.
Cheng, K.B. , Lee, K.C., Ueng. T. H. and Mou , K.J. (2002). Electrical and Impact Properties of the Hybrid Knitted Inlaid Fabric Reinforced Polypropylene Composites, Compo. Part A, 33(9): 1219—1226.
14.
Cheng, K.B. , Ramakrishna, S. and Lee , K.C. (2000). Electromagnetic Shielding Effectiveness of Copper/Glass Fiber Knitted Fabric Reinforced Polypropylene Composites, Compo. Part A, 31(10): 1039—1045.
15.
Chen, H.C., Lee, K.C. and Lin J.H. (2004). Electromagnetic and Electrostatic Shielding Properties of Co-weaving-knitting Fabrics Reinforced Composites, Compo. Part A, 35(11): 1249—1256.
16.
Keiser, B.E. (1979). Principles of Electromagnetic Compatibility, Washington DC: Artech House Inc., pp. 111—139.
17.
Lin, J.H. , Tsai, I.S. and Hsing W.H. (1998). Introduction to an Innovative Rotor Twister, J. Textile Institute, Part 1 , 89(2): 266—273.
18.
Lin, J.H. , Tsai, I.S., Hsing , W.H. and Yang, Z.Z. (1998). The Influence of the Twist Direction on the Physical Properties of a Plied Yarn in a Rotor Twister , J. Textile Institute, Part 1 , 89(3): 480—484.
19.
Lin, Z.H. and Hsing, W.H. (1997). The Study of the Warp-Weft Knitting Machine, J. Hwa Gang Textile, 5(1): 30—35.
20.
Yang, C.C. and Hsing, W.H. (1998). The Research of Physics Properties of Rib Fabric with Warp and Weft, J. Hwa. Gang. Textile, 5(2): 157—169.
21.
Chang, H.L. (2000). A Study of Coweaving Rib-warped Fabrics, Graduate Institute of Textile Engineering, Feng Chia University , Taichung, Taiwan, pp. 4—20.
22.
Astm (1999). D4935 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials, ASTM.
23.
Wilson, P.F. and Ma, M.T. (1986). A Study of Techniques for Measuring the Electromagnetic Shielding Effectiveness of Materials, NBS technical note 1095.
24.
Wilson, P.F. , Ma, M.T. and Adams, J.W. (1988). Techniques for Measuring the Electromagnetic Shielding Effectiveness of Materials I. Far-field Source Simulation, IEEE Trans on EMC, 30(3): 239—250.
25.
Simon, R.M. and Stutz, D. (1983). Test Methods for Shielding Materials, EMC Technology, 2(4): 39—48.
26.
Advantest Co. (1997). Operation Manual of R-3132 Spectrum Analyzer, ADVANTEST Co., pp. 7—56 and 81—101.
27.
Paul, C.R. (1992). Introduction to Electromagnetic Compatibility , pp. 632—687, Wiley, New York .
28.
Cheng, K.B., Ramakrishna, S. and Lee, K.C. (2001). Electrostatic Discharge Properties of Knitted Copper Wire Glass Fiber Fabric Reinforced Polypropylene Composites, Polym. Comp., 22(2): 185—196.
29.
IEC (1995). 61000-4-2 Electromagnetic Compatibility (EMC), Part 4: Testing and Measurement Techniques, Section 2: Electrostatic Discharge Immunity Test, IEC.
