Sage Journals: Discover world-class research

Free access

Research article

First published 2010-11

Development of a PC-based control system for a five-axis ultraprecision micromilling machine ‘Ultra-Mill’ and its performance assessment

M K M Nor, K Cheng

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2011-10

Design and Performance Evaluation of MR Damper for Integrated Isolation Mount

Min-Sang Seong, Seung-Bok Choi, Cheol-Ho Kim

Journal of Intelligent Material Systems and Structures

Retricted access

Research article

First published 2024-10

Design and analysis methods for aerostatic bearings: The past,the present,and the future

Ning Gou, Kai Cheng, Dehong Huo

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Free access

Research article

First published 2013-9

Design and analysis of a novel large-aperture grating device and its experimental validation

Qingshun Bai, Yingchun Liang, Kai Cheng [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2013-10

Selection of machining conditions for microchannels in ultraprecision diamond turning

Thanh-Hung Duong, Hyun-Chul Kim, Dong-Yoon Lee

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2022-8

Investigation on the surface roughness modeling and analysis for ultra-precision diamond turning processes constrained by the complex multisource factors

Siyuan Fu, Hong Yang, Shouli Sun [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2007-7

Development of a virtual machining and inspection system for ultra-precision diamond turning

W B Lee, C F Cheung, J G Li [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-12

Surface quality predictive model for ultraprecision fly-cutting based on an integrated hybrid CNN-LSTM

Adeel Shehzad, Xiaoting Rui, Yuanyuan Ding [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2011-1

Good Manufacturing Practices—Grade Preformed Ossicular Prostheses from Banked Bone via Computer Numerically Controlled Micromilling

Stefano Berrettini, Luca Bruschini, Cesare Stefanini [...]

Annals of Otology,Rhinology & Laryngology

Search results