Sage Journals: Discover world-class research

Retricted access

Research article

First published 2020

Tooth flank modification to reduce transmission error and mesh-in impact force in consideration of contact ratio for helical gears

Chao Jia, Zongde Fang, Ligang Yao [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2008-9

Simulation of generation and tooth contact analysis of helical gears with crowned flanks

A Kawalec, J Wiktor

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2018-1

Accurate modification methodology of universal machine tool settings for spiral bevel and hypoid gears

Zhen-yu Zhou, Jin-yuan Tang, Han Ding

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2019-9

Impact analysis and vibration reduction design of spiral bevel gears

Yanming Mu, Zongde Fang, Wenli Li

Proceedings of the Institution of Mechanical Engineers,Part K: Journal of Multi-body Dynamics

Open access

Research article

First published 2014

Accurate Tooth Lead Crowning without Twist in Cylindrical Helical Gear Grinding

Hu Zhang, Chenggang Fang, XiaoDiao Huang

Advances in Mechanical Engineering

Open access

Research article

First published 2022-3

Modelling of incident light occlusion during gear measuring based on the line-structured laser sensor and analysis on its influence factors

Bo Yu, Hanlin Kou, Yanqiang Sun [...]

Measurement and Control

Retricted access

Research article

First published 2008-6

A parameterized numerical method for generating discrete helical gear tooth surface allowing non-standard geometry

J Hedlund, A Lehtovaara

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2018-10

Design and analysis of high contact ratio spiral bevel gears by modified curvature motion method

Yanming Mu, Zongde Fang

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-6

Double modification of a rack cutter using a variable pressure angle and modulus

Hsueh-Cheng Yang

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Review article

First published 1995-11

A Note on Tip Relief and Backlash Allowances in Non-Metallic Gears

D Walton, A A Tessema, C J Hooke [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results