The present paper describes a method for the determination of equations representing modified flanks using an assumed technology of gear generation. Modification of flanks is introduced by a suitable change of the trajectory of tool motion. The developed equations allow for the creation of precise geometric models of mating teeth by considering the shapes of modified flanks obtained after gear generation. After simulation of gear generation, proper finite element analysis of tooth contact of mating teeth is done, which is necessary for checking and optimization purposes.
JaśkiewiczZ.WasiewskiA.Spur gear transmissions (in Polish)vol. 11992 (Transport and Communication PublishersWarsaw).
3.
KawalecA.Computer aided synthesis and modelling of modified helical gear transmissions with finite element analysis2005 (Publishing Office of the Rzeszów University of TechnologyRzeszów, Poland).
4.
KahramanA.BajpaiP.AndersonN. E.Influence of tooth profile deviations on helical gear wear. Trans. ASME, J. Mech. Design2005127(4)656–663.
5.
American National Standards Institute.ANSI-AGMA 6002-B93. Design guide for vehicle spur and helical gears, February 1993 (ANSINew York, NY).
6.
International Organization for Standardization.ISO 6336:1996. Calculation of load capacity of spur and helical gears1996 (ISOGeneva, Switzerland).
7.
WiktorJ.Analytical and numerical methods of analysis of geometric parameters, disturbances of motion and strength of cylindrical gear transmissions (in Polish)2004, (Publishing Office of the Rzeszów University of Technology, RzeszówPoland).
8.
JaśkiewiczZ.WasiewskiA.Spur gear transmissions (in Polish)vol. 21995 (Transport and Communication PublishersWarsaw).
9.
MaatarM.VelexV.Quasi-static and dynamic analysis of narrow-faced helical gears with profile and lead modifications. Trans. ASME, J. Mech. Design1997119(4)474–480.
10.
LitvinF. L.FuentesA.Gear geometry and applied theory2004 (Cambridge University PressCambridge, UK).
11.
LitvinF. L.DonnoM. D.PengA.VorontsovA.HandschuhR. F.Integrated computer program for simulation of meshing and contact of gear drives. Comput. Meth. Appl. Mech. Engng2000181(1-3)71–85.
12.
SeolI. H.KimD. H.The kinematic and dynamic analysis of crowned spur gear drive. Comput. Meth. Appl. Mech. Engng1998167(1-2)109–118.
13.
ZhangY.FangZ.Analysis of tooth contact and load distribution of helical gears with crossed axes. Mechanism and Machine Theory199934(1)41–57.
14.
GosselinC.Loaded tooth contact analysis of spur, helical and hypoid gears based on the finite strips and finite prisms models. In Proceedings of the 4th World Congress on Gearing and power transmissions, Paris1999vol. 1, pp. 29–40 (MCIParis).
15.
LiS.Gear contact model and loaded tooth contact analysis of a three-dimensional, thin-rimmed gear. Trans. ASME, J. Mech. Design2002124(3)511–517.
16.
LitvinF. L.FuentesA.Gonzalez-PerezI.CarvenaliL.KawasakiK.HandschuhR. F.Modified involute helical gears: Computerized design, simulation of meshing and stress analysis. Comput. Meth. Appl. Mech. Engng2003192(33-34)3619–3655.
17.
KawalecA.WiktorJ.CeglarekD.Comparative analysis of tooth-root strength using ISO and AGMA standards in spur and helical gears with FEM-based verification. Trans. ASME, J. Mech. Design2006128(5)1141–1158.
18.
VaujanyJ.Axis misalignments and crowning for helical cylindrical gears. In Proceedings of the 4th World Congress on Gearing and power transmissions, Paris1999vol. 1, pp. 199–211 (MCIParis).
19.
BauschT. (Ed.) Moderne Zahnradfertigung1994 (Expert VerlagRenningen-Malmsheim, Germany).
20.
MathewsJ. H.Numerical methods for mathematics, science and engineering1987 (Prentice HallEnglewood Cliffs, NJ).
21.
ADINA R&D, Inc.ADINA theory and modeling guide2006 (ADINA R&D, Inc.Watertown, MA).
22.
BatheK. J.Finite element procedures1996 (Prentice-HallEnglewood Cliffs, NJ).
23.
KleiberM. (Ed.) Handbook of computational solid mechanics1998 (Springer-VerlagBerlin).
