Sage Journals: Discover world-class research

Open access

Research article

First published 2025-3

On the effects of tool nose radius in alleviating parasitic mechanisms for cutting of aluminum alloy

Sweta Baruah, James B. Mann, Srinivasan Chandrasekar [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2023-3

Effect of nose radius on the chip morphology,cutting force and tool wear during dry turning of Inconel 718

A. Shailesh Rao

Tribology - Materials,Surfaces & Interfaces

Free access

Research article

First published 2024-1

Effect of edge radius on forces,tool wear and surface integrity under edge radius dominated tool-chip contact conditions

Joyson Selvakumar S, Sakthivel P, Jerome Arul Praveen [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2020-7

Modeling and detection of the prepared tool edge radius

Zhao Xuefeng, Li Hui, He Lin [...]

Science Progress

Free access

Review article

First published 1996-10

Prediction of Cutting Forces and Built-Up Edge Formation Conditions in Machining With Oblique Nose Radius Tools

J A Arsecularatne, R F Fowle, P Mathew [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2014-2

Experimental investigations on the role of tool size in causing and controlling defects in single point incremental forming process

Ghulam Hussain

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2021

Ability of a Risk Prediction Tool to Stratify Quality and Cost for Older Patients With Operative Distal Radius Fractures

Abidemi Adenikinju, Rachel Ranson, Samantha A. Rettig [...]

Geriatric Orthopaedic Surgery & Rehabilitation

Free access

Research article

First published 2018-1

A Study of Cutting Temperatures in Turning Carbon-Fiber-Reinforced-Plastic (CRFP) Composites with Nose Radius Worn Tools

Chung-Shin Chang

Polymers and Polymer Composites

Free access

Research article

First published 2003-8

The effects of tool geometry change on shearing edge finish in fine-blanking of different materials

Y C Leung, L C Chan, C H Cheng [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025

Preparation of the cutting edge on broaching tools by brushing-polishing with ceramic brushes: Analysis and prediction of effects

Cristian Pérez-Salinas, Leticia Mayorga-Ases, Diego Carranza-Calero [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results