Sage Journals: Discover world-class research

Retricted access

Research article

First published 2026

Optimization of rivet riveting parameters for saw-chain and their effects on fatigue performance

Yabing Cheng, Chengming Lou, Xiaokang Zhong [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2013-11

Effects of sawing parameters on natural stone processing performance

Fatih Bayram, Nazmi Erhan Yasitli

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Open access

Research article

First published 2020-11

Effect of IDT position parameters on SAW yarn tension sensor sensitivity

Bingbing Lei, Wenke Lu, Zhibao Mian [...]

Measurement and Control

Retricted access

Research article

First published 2014-3

Effect of operating parameters on the removal of bone cement by a sawing process

Thomas P James, Brian Sheehan, Amrit Sagar

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Retricted access

Research article

First published 2026-3

Leveraging the potential of the modified WOA to achieve optimal hardness through appropriate parameter selection in SAW

Mohamed Mezaache, Omar Fethi Benaouda, Ahmed Kellai [...]

Concurrent Engineering

Retricted access

Research article

First published 2024-6

Finite element modeling of high-speed orthogonal cutting: A contribution to understanding the influence of mesh parameters on saw-toothed chip formation

Mehmet Aydın

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2011-10

Effect of slurry parameters on material removal rate in multi-wire sawing of silicon wafers: a tribological approach

G Skomedal, E J Øvrelid, S Armada [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Open access

Research article

First published 2021-12

Influence of bandsawing processing parameters on the preparation of cortical bone flake

Jing Ni, Jun Cai, Zhen Meng [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2014-5

Surface roughness optimization in processing SiC monocrystal wafers by wire saw machining with ultrasonic vibration

Shujuan Li, Bo Wan, Robert G Landers

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2013-6

An experimental investigation on slicing of potassium dihydrogen phosphate crystal

Qiangguo Wang, Hang Gao, Zhijian Pei [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results