Sage Journals: Discover world-class research

Free access

Research article

First published 2013-12

Hybrid Microfabrication of Nanofiber-Based Sheets and Rods for Tissue Engineering Applications

Suk-Hee Park, Min Sung Kim, Dasom Lee [...]

Journal of Laboratory Automation

Retricted access

Other

First published 1977-6

A Plasto-Hydrodynamic Analysis of the Lubrication and Coating of Wire Using a Polymer Melt during Drawing

P.J. Thompson, G.R. Symmons

Proceedings of the Institution of Mechanical Engineers

Retricted access

Research article

First published 2023-3

Investigation of copper reinforced Acrylonitrile Butadiene Styrene and Nylon 6 based thermoplastic polymer nanocomposite filaments for 3D printing of electronic components

Balwant Singh, Raman Kumar, Jasgurpreet Chohan [...]

High Performance Polymers

Retricted access

Research article

First published 1994-1

FORMATION AND MICROSTRUCTURE OF PlASMA SPRAYED POLYAMIDE COATINGS

Y. Bao, D. T. Gawne, D. Vesely [...]

Surface Engineering

Free access

Research article

First published 2020-1

Fabricating poly(methyl methacrylate) parts using high-speed sintering

Karan Bharaj, Sourabh Paul, Kamran Aamir Mumtaz [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1994-04

The Impact Behavior of Thermoplastic Sheet Composites

D.M. Bigg

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2024-02

Facile Adaptation of a Fused Deposition Modeling 3D Printer to Motionless Printing through Programmable Electric Relay: Discretized Modeling and Experiments

Sanjana Sham Sunder Bharadwaj, Chia-Yi Lin, Mounica J. Divvela [...]

3D Printing and Additive Manufacturing

Retricted access

Review article

First published 2022-5

Fabrication techniques of polymeric nanocomposites: A comprehensive review

Abdallah Kamal, Mayar Ashmawy, Shanmugan S [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2018-2

Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly(lactic acid) filaments into 3D printed materials?

Sisi Wang, Lore Capoen, Dagmar R. D'hooge [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Open access

Research article

First published 2020-9

The effect of additives and process parameters on the pilot-scale manufacturing of polylactic acid sub-microfibers by melt electrospinning

Kylie Koenig, Stefan Hermanns, Jacqueline Ellerkmann [...]

Textile Research Journal

Search results