Sage Journals: Discover world-class research

Open access

Research article

First published 2021-6

Identification of plasticity-controlled creep and fatigue failure mechanisms in transversely loaded unidirectional thermoplastic composites

Ozan Erartsın, Martin van Drongelen, Leon E. Govaert

Journal of Composite Materials

Retricted access

Research article

First published 2012-7

Failure Mechanism of Crack on Oxide–Alloy Interface: An Elastic–Plastic Analysis

Honggang Zhou, Mohammed Cherkaoui

International Journal of Damage Mechanics

Retricted access

Research article

First published 2015-8

Critical Assessment 15: Science of deformation and failure mechanisms in twinning induced plasticity steels

M. X. Huang, Z. Y. Liang, Z. C. Luo

Materials Science and Technology

Retricted access

Research article

First published 2006-02

Identification of Fiber-reinforced Plastic Failure Mechanisms from Acoustic Emission Data using Neural Networks

Nat Ativitavas, Thanyawat Pothisiri, Timothy J. Fowler

Journal of Composite Materials

Open access

Review article

First published 2023-6

Investigation of strain rate dependent microscopic failure mechanisms in short fiber reinforced plastics using finite element simulations

Timo Schweiger, Jörg Lienhard, Hannes Grimm-Strele [...]

Journal of Composite Materials

Open access

Research article

First published 2024-07

Compression behavior of warp-knitted spacer fabric based on simplified finite element method

Wenxiang Song, Xiaotao Ma, Pibo Ma

Journal of Industrial Textiles

Open access

Research article

First published 2019

Experimental study on the mechanical behavior of BFRP-bamboo composite beam

Qingfang Lv, Ye Liu

Composites and Advanced Materials

Retricted access

Research article

First published 1999-10

Constitutive Modeling of Material Damage for Fatigue Failure Prediction

C. L. Chow, Y. Wei

International Journal of Damage Mechanics

Retricted access

Research article

First published 2017-5

Similar and dissimilar resistance spot weldability of galvanised DP1000 and TWIP980 steels

S. T. Wei, D. Lv, R. D. Liu [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 1998-1

Aspects of thrust cone tribology: Part 2: Surface failure in thrust cones and the influence of rolling and sliding speeds in concentrated contacts

L. M. Rudd, C. G. Barnes, D. A. Kelly

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Search results