Sage Journals: Discover world-class research

Free access

Research article

First published 2002-10

On cutting forces in peripheral milling of curved surfaces

L Zhang, L Zheng, Z-H Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2003-7

An investigation of cutting forces in horizontal-mode peripheral milling of curved surfaces

L Zhang, L Zheng, Z-H Zhang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2019-10

Modelling and simulation of surface topography machined by peripheral milling considering tool radial runout and axial drift

Hui-Qun Chen, Qing-Hui Wang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2008-6

Consistency study on three cutting force modelling methods for peripheral milling

M Wan, W H Zhang, G H Qin [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2006-9

Effect of workpiece curvature on cutting forces and surface error in peripheral milling

V S Rao, P V M Rao

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2014-10

Prediction of machining accuracy based on a geometric error model in five-axis peripheral milling process

Guofu Ding, Shaowei Zhu, Elssawi Yahya [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2011-6

Peripheral milling of thin titanium plates: modelling,analysis,and process planning

R G Landers, G Galecki, K Young [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2014

Influence of Chatter on Machining Distortion for Thin-Walled Component Peripheral Milling

Qinghua Song, Zhanqiang Liu, Xing Ai

Advances in Mechanical Engineering

Retricted access

Research article

First published 2021-2

Study on micro cutting fundamentals considering the cutting edge radius and the workpiece material in micro end milling

Yang Li, Xiang Cheng, Siying Ling [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2010-12

On milling of thin-walled tubular geometries

T C Bera, K A Desai, P V M Rao

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results