Study on micro cutting fundamentals considering the cutting edge radius and the workpiece material in micro end milling

Abstract

Previous studies found that the peripheral cutting edge and end cutting edge in micro end milling had different cutting phenomena considering the size effect in micro cutting processes. This paper is a further study on this point considering different workpiece materials and cutting edge radii. Finite element simulations have been conducted to determine the minimum undeformed chip thickness (MUCT) by the chip morphology and the results are verified by micromilling experiments. Both the simulations and experiments show that the MUCT of the peripheral cutting edge and the end cutting edge are different even if the cutting edge radii remain unchanged. The MUCT is directly proportional to the cutting edge radius. Material properties also have some effects on the MUCT of the peripheral cutting edge. But it has limited effects on that of the end cutting edge. The results indicate that the feed engagement other than the axial depth of cut should be carefully selected in micro end milling when considering different workpiece materials.