Sage Journals: Discover world-class research

Retricted access

News

First published 2014-9

Hot micro-embossing: Effect of pressure on 316L metal parts

Elsa W. Sequeiros, V. C. Neto, M. T. Vieira [...]

Powder Metallurgy

Retricted access

Research article

First published 2018-9

Mechatronic system for measuring hot-forged automotive parts based on image analysis

Romulo G Lins

Transactions of the Institute of Measurement and Control

Retricted access

Research article

First published 2020-8

Numerical simulation and experimental research on hot extrusion of 5B70 aluminum alloy complex end frame part

Yang Liu, Jingxuan Zhang, Zhibo Li [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2017-2

Development of a partition panel of an Al6061 sheet metal part for the improvement of formability and mechanical properties by hot forming quenching

Dae-Cheol Ko, Dae-Hoon Ko, Jae-Hong Kim [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2015-4

An investigation into the effect of variable flash thickness on the strength of an AA7075 part obtained by hot closed-die forging

Saeed Zare Chavoshi, Mehdi Tajdari, Xichun Luo

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-4

Micro metal powder hot embossing: Influence of binder on austenitic stainless steel microparts replicability

E. W. Sequeiros, M. T. Vieira, M. F. Vieira

Powder Metallurgy

Retricted access

Research article

First published 2016-06

Effect of Hot Vapor Smoothing Process on Surface Hardness of Fused Deposition Modeling Parts

Rupinder Singh, Sunpreet Singh, Iqwinder P. Singh

3D Printing and Additive Manufacturing

Open access

Research article

First published 2022-04

Temperature Analyses in Fused Filament Fabrication: From Filament Entering the Hot-End to the Printed Parts

Jie Zhang, Egle Vasiliauskaite, Alec De Kuyper [...]

3D Printing and Additive Manufacturing

Open access

Research article

First published 2021-01

Optimal hot metal desulphurisation slag considering iron loss and sulphur removal capacity part II: evaluation

Frank N. H. Schrama, Elisabeth M. Beunder, Sourav K. Panda [...]

Ironmaking & Steelmaking: Processes,Products and Applications

Open access

Research article

First published 2021-01

Optimal hot metal desulphurisation slag considering iron loss and sulphur removal capacity part I: fundamentals

Frank N. H. Schrama, Elisabeth M. Beunder, Sourav K. Panda [...]

Ironmaking & Steelmaking: Processes,Products and Applications

Search results