The use of replicative processes has become strategic and critical in industry to produce precise, microscopically detailed metallic parts and devices via low cost manufacturing routes. Metal powder hot embossing is an emerging process that brings some advantages associated with the reduction of production costs relative to powder injection moulding (PIM). The technology involves four distinct steps: preparation of the selected feedstock material (powder and binder); hot embossing; debinding; and sintering. The effect of continuous pressure during the hot embossing step as a means of replicating microdetails in 316L stainless steel parts is examined. Dimensional accuracy, microstructure and mechanical properties of the parts produced were evaluated. For the configuration tested, the most promising results were achieved when processing at 180°C for 30 min at a pressure of 14 MPa.
Get full access to this article
View all access options for this article.
References
1.
WorgullM: ‘Hot embossing – theory and technology of microreplication’, in‘Micro & nano technologies’; 2009, Norwich, NY, William Andrew.
2.
LiJM, LiuC and PengJ: ‘Effect of hot embossing process parameters on polymer flow and microchannel accuracy produced without vacuum’, J. Mater. Process. Technol., 2008, 207,163–171.
3.
Federal Ministry of Education and Research: BMBF Microsystems Framework Programme 2004–2009, BMBF, Ref. 514, VDI/VDE–IT: Bonn, Berlin, 2005.
4.
DimovSS, MatthewsCW, GlanfieldA and DorringtonP: ‘A roadmapping study in multi-material micro manufacture, 4M2006’, Proc. 2nd Int. Conf. on Multi-Material Micro Manufacture, (ed. MenzWet al.); 2006, New York, Elsevier.
5.
BarreirosFM, VieiraMT and CastanhoJM: ‘Fine tuning injection feedstock by nanocoating SS powder’:Met. Powder Rep., 2009, 64,18–21.
6.
MalekCK, CoudevylleJ.-R, JeannotJ.-C and DuffaitR: ‘Revisiting micro hot embossing with moulds in non-conventional materials’, Microsys. Technol., 2007, 13, 475–481.
7.
DarioP, CarrozzaMC, BenvenutoA and MenciassiA: ‘Micro-systems in biomedical applications’, J. Micromech. Microeng., 2000, 10, 235.
8.
RotaA, DuongT.-V and HartwigT: ‘Micro powder metallurgy for the replicative production of metallic microstructures’, Microsys. Technol., 2002, 8, 323.
9.
SequeirosEW, FerreiraTJ, VieiraMT and VieiraMF: ‘Study and development of micro hot embossing on 316L/polymer mixtures’, Proc. Euro PM 2011, Vol. 2; 2011, Shrewsbury, EPMA.
10.
FuG, TorSB, LohNH and HardtDE: ‘Micro-hot-embossing of 316L stainless steel micro-structures’, Appl. Phys. A – Mater. Sci. Process., 2009, 97, 995–931.
11.
SequeirosEW, VieiraMT and VieiraMF: ‘Hot embossing: effect of parameters process on replicated 316L metal structures’, Proc. Euro PM2012, Vol. 1; 2012, Shrewsbury, EPMA.
12.
SahliM, MillotC, GelinJC and BarriereT: ‘Development and characterization of polymers – metallic hot embossing process for manufacturing metallic micro-parts’, AIP Conf. Proc. 1315, 677–682; 2010, New York, American Institute of Physics.
BarreirosFM, VieiraMT, JorgeH and MascarenhasJ: ‘Manual de microfabricação’, B3, ‘Processos de Replicação’, chap. 2, 44–64; 2—8, Edição Centimfe.
15.
QuinardC, BarrièreT and GelinJC: ‘Development and property identification of 316L stainless steel feedstock for PIM and µPIM’, Powder Technol., 2009, 190, 123–128.
16.
AbolhansaniH and MuhamadN: ‘A new starch-based binder for metal injection molding’, J. Mater. Process. Technol., 2010, 210, 961–968.
17.
QuinardC, BarrièreT, GelinJC, SongJP, ChengZQ and LiuBS: ‘Development of metal/polymer mixtures dedicated to macro and micro powder injection moulding: experiments and simulations’: Mater. Process. Design: Modell. Simul. Appl., 2007, 099–1104.
18.
SotomayorME, VárezA and LevenfeldB: ‘Influence of powder size distribution on rheological properties of 316L powder injection moulding feedstocks’, Powder Technol., 2010, 200, 30–36.
19.
‘ASM handbook’, Vol. 7, ‘Powder metal technologies and applications’; 1998, Materials Park, OH, ASM International.
20.
KlarE and SamalPK: ‘Powder metallurgy stainless steels: processing, microstructures, and properties’; 2007, Materials Park, OH, ASM International.
21.
VieiraMT, MartinscAG, BarreirosFM, MatosM and CastanhoJM: ‘Surface modification of stainless steel powders for microfabrication’, J. Mater. Process. Technol., 2008, 201, 651–656.
