Sage Journals: Discover world-class research

Retricted access

Research article

First published 2017-8

Potential for improving efficiency of the internal cylindrical grinding process by modification of the grinding wheel structure—Part II: Grinding wheels made of superabrasive grains

Krzysztof Nadolny, Witold Habrat

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2017-8

Potential for improving efficiency of the internal cylindrical grinding process by modification of the grinding wheel structure—Part I: Grinding wheels made of conventional abrasive grains

Krzysztof Nadolny, Witold Habrat

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2025

Grinding structured riblet surfaces using a superhard grinding wheel with the phyllotactic pattern of abrasive grains

Wang Guoxun, Lyu Yushan, Li Xingshan [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2018-5

The effect of active surface morphology of grinding wheel with zone-diversified structure on the form of chips in traverse internal cylindrical grinding of 100Cr6 steel

Krzysztof Nadolny, Wojciech Kapłonek, Grzegorz Królczyk [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2023-5

Layup structures of CFRP grinding wheel matrix and an optimal design of combined multi-layup structures

Ziru Huang, Junli Li, Qinglong An

Journal of Reinforced Plastics and Composites

Free access

Research article

First published 2016-2

Shaping the cutting ability of grinding wheels with zone-diversified structure

Krzysztof Nadolny

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2017-12

The effect of the grinding wheel modification on the state of the workpiece surface layer after internal cylindrical grinding of steel C45

Ryszard Wójcik, Krzysztof Nadolny

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2006-1

Tribological design of grinding wheels using X-ray diffraction techniques

M. J. Jackson

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Open access

Research article

First published 2022-10

Study on relief grinding interference checking method of toroidal worm wheel hob

Chengjie Rui, Jinyou Xu, Yuhua Zhang

Advances in Mechanical Engineering

Retricted access

Research article

First published 2023-6

Evaluation of the grinding process utilizing an auxiliary compressed air jet on cleaning the grinding wheel surface

Omid Hatami Farzaneh, Hamed Adibi, Seyed Mehdi Rezaei

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Search results