Sage Journals: Discover world-class research

Retricted access

Research article

First published 2016-4

Optimization of fillet stress to enhance the bending strength through non-standard high contact ratio spur gears

P Marimuthu, G Muthuveerappan

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2015-3

Influence predictions of geometric parameters on face gear strength

Zhengminqing Li, Hao Wu, Rupeng Zhu

Advances in Mechanical Engineering

Retricted access

Research article

First published 2006-8

Can non-standard involute gears of different modules mesh?

C Spitas, V Spitas

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2006-8

Generating standard 20° involute pinions with increased fillet strength by using 25° rack cutters with non-standard module

C Spitas, V Spitas

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2024-1

An investigation of the wear and efficiency in non-standard internal spur gear set

R Ravivarman, R Prabhu Sekar

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Free access

Research article

First published 2004-9

Tooth-root stress calculation of internal spur gears

A Kawalec, J Wiktor

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2019-11

A model approach for considering nonmetallic inclusions in the calculation of the local tooth root load-carrying capacity of high-strength gears made of high-quality steels

D Fuchs, S Schurer, T Tobie [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-5

In-depth analysis of crack area characteristics of fisheye failures influenced by the multiaxial stress condition in the tooth root fillet of high-strength gears

Daniel Fuchs, Sascha Rommel, Thomas Tobie [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2024-2

Investigation on the effect of strain rate on standard involute and asymmetric polymer gears using the newly design fixture for single tooth testing method

Mohit Jain, Santosh Patil

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2021-12

Geometry optimization of the rolling tool for gear roll-forming process

Bo Peng, Yang Luo, Yuanxin Luo [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results