Sage Journals: Discover world-class research

Retricted access

Research article

First published 1994-06

An Energy Balance Based Approach to the End-Notched Flexure Test

Scott A. Laman, M. Vedula

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2020-10

Numerical assessment of strain rate in an adhesive layer throughout double cantilever beam and end notch flexure tests

Paulo DP Nunes, Catarina SP Borges, Eduardo AS Marques [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 1995-11

Three Dimensional Analysis and Resulting Design Recommendations for Unidirectional and Multidirectional End-Notched Flexure Tests

B. D. Davidson, R. Kruger, M. König

Journal of Composite Materials

Retricted access

Research article

First published 1999-8

Mode II fracture toughness evaluation using four point bend,end notched flexure test

R.H. Martin, B.D. Davidson

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2005-10

Effects of Friction,Geometry,and Fixture Compliance on the Perceived Toughness from Three-and Four-Point Bend End-Notched Flexure Tests

Barry D. Davidson, Xuekun Sun

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2007-05

Influences of Friction,Geometric Nonlinearities,and Fixture Compliance on Experimentally Observed Toughnesses from Three and Four-point Bend End-notched Flexure Tests

Barry D. Davidson, Xuekun Sun, Anthony J. Vinciquerra

Journal of Composite Materials

Open access

Research article

First published 2022-10

Mode II fracture characterisation of a honeycomb/carbon-epoxy sandwich panel using the asymmetric end-notched flexure test

RDF Moreira, MFSF de Moura, RJB Rocha [...]

Journal of Sandwich Structures & Materials

Retricted access

Research article

First published 2015-9

Applicability of standard delamination tests (double cantilever beam and end notch flexure) for 5HS fabric-reinforced composites in weft-dominated surface

Marcos Yutaka Shiino, Reyndert Christiaan Alderliesten, Mauricio Vicente Donadon [...]

Journal of Composite Materials

Retricted access

Research article

First published 2004-07

Effect of Crack Length Measurement Technique and Data Reduction Procedures on the Perceived Toughness from Four-Point Bend End-Notched Flexure Tests

A. Joseph Vinciquerra, Barry D. Davidson

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 1986-11

On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode II Testing

L.A. Carlsson, J.W. Gillespie, R.B. Pipes

Journal of Composite Materials

Search results