The end notched flexure (ENF) specimen is examined as a candidate for measuring interlaminar fracture toughness in skew symmetric loading. A simple design study for sizing the ENF specimen to minimize geometric nonlinear response and to avoid nonlinear material behavior or flexural failure is presented. Results indicate that inter laminar shear effects may be significant for tough resin systems requiring large thickness-to-length geometries. The influences of interlaminar shear deformation and fric tion between the crack surfaces on the strain energy release rate are examined.
Get full access to this article
View all access options for this article.
References
1.
Pagano, N.J. and R.B. Pipes, "The Influence of Stacking Sequence on Laminate Strength," J Comp. Mat , 5:50 (1971).
2.
Pagano, N.J. and R.B. Pipes, "Some Observations on the Interlaminar Strength of Composite Laminates," Int. J. Mech. Sci, 15679 (1973).
3.
Wilkins, D.J. , J.R. Eisenmann, R.A. Camin, W.S. Margolis and R.A. Benson, "Characterizing Delamination Growth in Graphite-Epoxy," Damage in Composite Materials, ASTM STP775, p. 168 (1982).
4.
Devitt, D. F. , R.A. Schapery and W.L. Bradley, "A Method for Determimng the Mode I Delamination Fracture Toughness of Elastic and Viscoelastic Materials," J. Composite Materials , 14:270 (1980).
5.
O'Brien, T.K. , "Characterization of Delamination Onset and Growth in a Composite Laminate," Damage in Composite Materials, ASTM STP775, p. 140 (1982).
6.
Pipes, R.B., B.E. Kaminski and N.J. Pagano, "Influence of the Free-Edge Upon the Strength of Angle-Ply Laminates ," Analysis of the Test Methods for High Modulus Fibers and Composites, ASTM STP 521, p. 218 (1973).
7.
Kedward, K.T. , "On the Short Beam Test Method;' Fibre Sci. & Tech., 5:85 (1972).
8.
Browning, C.E. , F.L. Abrams and J.M. Whitney, "A Four-Point Shear Test for Graphite/Epoxy Composites," Composite Materials. Quality Assurance and Processing , ASTM STP 797, p. 54 (1983 ).
9.
Russell, A.J. and K.N. Street, "Moisture and Temperature Effects on the Mixed-Mode Delamination Fracture of Unidirectional Graphite/Epoxy," Delamination and Debonding of Materials, ASTM STP 876, p. 349 (1985).
10.
Timoshenko, S.P. , "Strength of Materials," Part I, Kneger Publishing (1984).
11.
Timoshenko, S.P. and J.N. Goodier, "Theory of Elasticity," 3rd. ed., McGraw-Hill (1970 ).
12.
Gillespie, J. W and L.A. Carlsson, "Finite Element Analysis of the End Notched Flexure (ENF) Specimen" Compos. Sic & Tech., Vol. 27 (1986) in press.
13.
Greenberg, M.D. , "Foundations of Applied Mathematics;' Prentice-Hall (1978).
