Sage Journals: Discover world-class research

Free access

Research article

First published 2007-2

The Effect of the Cutting Edge Radius on a Machined Surface in the Nanoscale Ductile Mode Cutting of Silicon Wafer

S Arefin, X P Li, M B Cai [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2021-2

Study on micro cutting fundamentals considering the cutting edge radius and the workpiece material in micro end milling

Yang Li, Xiang Cheng, Siying Ling [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2011-2

Investigation of cutting force behaviour considering the effect of cutting edge radius in the micro-scale milling of AISI 1045 steel

I-S Kang, J-S Kim, Y-W Seo

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2006-3

Influence of Cutting Edge Radius on the Wear Resistance of Powder Metallurgy High-Speed Steel Milling Inserts

J Rech, M-J Schaff

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2021-5

Investigation of effect of uncut chip thickness to edge radius ratio on nanoscale cutting behavior of single crystal copper: MD simulation approach

A. Sharma, P. Ranjan, R. Balasubramaniam

Journal of Micromanufacturing

Free access

Review article

First published 1996-10

Prediction of Cutting Forces and Built-Up Edge Formation Conditions in Machining With Oblique Nose Radius Tools

J A Arsecularatne, R F Fowle, P Mathew [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2018-9

Modelling of thrust force for worn drill bits characterised by cutting edge radius in drilling carbon fibre–reinforced plastic/Ti-6Al-4V alloy stacks

Bin Luo, Kaifu Zhang, Yuan Li [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2024-1

Effect of edge radius on forces,tool wear and surface integrity under edge radius dominated tool-chip contact conditions

Joyson Selvakumar S, Sakthivel P, Jerome Arul Praveen [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2015-6

Theoretical modeling of the critical conditions for ductile-regime milling of single crystalline silicon

Xiang Cheng, Li Li, Yumei Huang [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2025

Preparation of the cutting edge on broaching tools by brushing-polishing with ceramic brushes: Analysis and prediction of effects

Cristian Pérez-Salinas, Leticia Mayorga-Ases, Diego Carranza-Calero [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results