Sage Journals: Discover world-class research

Free access

Research article

First published 2017-11

Orthogonal cutting of TA6V alloys with chamfered tools: Analysis of tool–chip contact lengths

Floran Barelli, Vincent Wagner, Raynald Laheurte [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2015-2

Thermal error compensation on a computer numerical control machine tool considering thermal tilt angles and cutting tool length

Jun Yang, Xuesong Mei, Liang Zhao [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2020-5

Design of a turning cutting tool with large length–diameter ratio based on three-element type vibration absorber

Yiqing Yang, Haoyang Gao, Wenshuo Ma [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2016-9

An efficient way of investigating the intrinsic size effect in machining

Il Hyuk Ahn, Seung Ki Moon, Jihong Hwang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1974-12

The Stress Distribution in a Wedge-Shaped Metal-Cutting Tool for Triangular Distributions of Load on the Rake-Face Contact Length

P. F. Thomason

Journal of Mechanical Engineering Science

Free access

Research article

First published 2004-8

An investigation of the tool-chip contact length and wear in high-speed turning of EN19 steel

N. A. Abukhshim, P. T. Mativenga, M. A. Sheikh

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-4

Investigation on turning of Inconel 718 using differently coated microtextured tools

Dongyun Guo, Dazhong Wang, Shujing Wu [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2015-6

Effects of cutting parameters on chip morphology and tool wear in high-speed face milling of hardened steel

Xiaobin Cui, Jun Zhao

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1972

Rake Face Action of Cutting Lubricants: An Analysis of,and Experiments on,the Machining of Iron Lubricated by Carbon Tetrachloride

T. H. C. Childs

Proceedings of the Institution of Mechanical Engineers

Retricted access

Research article

First published 2025-5

Research on contact friction characteristics of SiCp/Al tool-chip under quasi-intermittent vibration assisted swing cutting

Yang Yang, Jinliang Li, Yu Chen [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results