Sage Journals: Discover world-class research

Open access

Research article

First published 2018-8

Study on whole factorial experiment of polishing the micro-hole in non-linear tubes by abrasive flow

Guosong Liu, Xinming Zhang, Xiang Zang [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2011-6

Scrap wafer regeneration by precise abrasive jet machining with novel composite abrasive for design of experiments

J-H Ke, F-C Tsai, J-C Hung [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2013-10

The use of a modern method of designing experiments in ball-cratering abrasive wear testing

Edyta Osuch-Słomka, Ryszard Ruta, Zbigniew Słomka

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2025-3

Study on the abrasion process and mechanism of rubber subjected to tipped cone scratching

Yuxin Tian, Congwen Wang, Chi Xiao [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2019-10

Simulation and experiment study of the self-excited oscillating mixer with abrasive jet used for the descaling of rusty steel

Hui Ji, Xiurong Cao, Songlin Nie [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Open access

Research article

First published 2021-8

Optimization of milling process parameters and prediction of abrasive wear rate increment based on cutting force experiment

Fei Li, Jun Liu

Advances in Mechanical Engineering

Retricted access

Other

First published 1965-6

Paper 13: Abrasive Wear of Journal Bearings by Particles in the Oil (Apparatus,Experiments,and Observations)

J. J. Broeder, J. W. Heijnekamp

Proceedings of the Institution of Mechanical Engineers,Conference Proceedings

Retricted access

Research article

First published 2025-10

Optimization of process parameters affecting surface roughness in magnetic lapping with mixed-size abrasives

Xiaoming Chen, Ning Liu, Fengli Niu [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2012-12

Run-to-run process control of magnetic abrasive finishing using bonded abrasive particles

Byung Woon Ahn, Seoung Hwan Lee

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2021-2

Experiment and simulation about the effect of wear-ring abrasion on the performance of a marine centrifugal pump

Wu Xianfang, Du Xinlai, Tan Minggao [...]

Advances in Mechanical Engineering

Search results