Sage Journals: Discover world-class research

Retricted access

Research article

First published 2025

Optimization of turning nose radius for Haynes 230: A hybrid RSM and deep learning approach

Ranganath KJ, H Shivananda Nayaka

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 1987-5

Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning

H T Young, P Mathew, P L B Oxley

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2016-9

An investigation of optimum cutting conditions in turning nodular cast iron using carbide inserts with different nose radius

Essam Ali Al Bahkali, Adham Ezzat Ragab, Ehab Adel El Danaf [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2018-1

A Study of Cutting Temperatures in Turning Carbon-Fiber-Reinforced-Plastic (CRFP) Composites with Nose Radius Worn Tools

Chung-Shin Chang

Polymers and Polymer Composites

Retricted access

Research article

First published 2023-3

Effect of nose radius on the chip morphology,cutting force and tool wear during dry turning of Inconel 718

A. Shailesh Rao

Tribology - Materials,Surfaces & Interfaces

Retricted access

Research article

First published 2009-11

The Effect of Tool Geometry on the Machinability of Polyamide During Precision Turning

Leonardo R. Silva, J. Paulo Davim

Journal of Composite Materials

Retricted access

Research article

First published 2019-5

Analysis of ground handling characteristic of aircraft with electric taxi system

Mingyang Huang, Hong Nie, Ming Zhang

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Free access

Research article

First published 2003-12

An improved chip flow model considering cutting geometry variations based on the equivalent cutting edge method

D H Wen, L Zheng, Z Z Li [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2026

Investigation on flank wear,surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication

Somyajit Swain, Soumikh Roy, Anshuman Das [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2023-11

Modelling and validation of surface roughness in micro-turned nickel-based alloys (Nimonic 90)

Vineet Kumar, GL Samuel

Journal of Micromanufacturing

Search results