Sage Journals: Discover world-class research

Retricted access

Research article

First published 2007-5

Aging response and strength formability parameters of hot rolled copper alloyed interstitial free steel

R. Rana, W. Bleck, S. B. Singh [...]

Materials Science and Technology

Free access

Research article

First published 2013-8

Hot incremental forming of magnesium and aluminum alloy sheets by using direct heating system

Le Van Sy, Nguyen Thanh Nam

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2018-6

Challenges in the formability of the next generation of automotive steel sheets

H. L. Yi, L. Sun, X. C. Xiong

Materials Science and Technology

Free access

Research article

First published 2021-2

Effect of pre-rolling temperature on the interfacial properties and formability of steel-steel bilayer sheet in Single Point Incremental Forming

Malik Hassan, Ghulam Hussain, Aaqib Ali [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2010-6

Characteristics of forming limit diagram of copper alloyed interstitial free steel

R. Rana, S. B. Singh, W. Bleck [...]

Materials Science and Technology

Free access

Research article

First published 2015-2

Influence of process and tool parameters on springback of high-strength steels

Sérgio F Lajarin, Paulo VP Marcondes

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025

Impact of swiveling and intrusion effects on corrosion behavior of HSLA 420 steel formed by incremental forming

Vignesh Gandhiraj, Sathiya Narayanan Chinnaiyan

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2018-6

Formability of aluminum 5083 friction stir welded blank in two-point incremental forming process

Pejman Ebrahimzadeh, Hamid Baseri, Mohammad J Mirnia

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2018-5

Structure and strength of sub-100 nm lamellar structures in cold-drawn pearlitic steel wire

Xiaodan Zhang, Niels Hansen, Andrew Godfrey [...]

Materials Science and Technology

Free access

Research article

First published 2014-9

Influence of anisotropy parameter on deep drawing of tailor welded blanks of low-carbon steels

Vysakh Vasudevan, Kaushik Bandyopadhyay, Sushanta K Panda

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results