Sage Journals: Discover world-class research

Open access

Research article

First published 2018-9

A novel milling force model based on the influence of tool geometric parameters in end milling

Xianglei Zhang, Jing Zhang, Hongming Zhou [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2013-12

Analysis of the cutting forces in plunge milling

Carlos EH Ventura, Amauri Hassui

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2015-6

Effects of cutting conditions on forces and force coefficients in plunge milling operations

Francesco Rafanelli, Gianni Campatelli, Antonio Scippa

Advances in Mechanical Engineering

Retricted access

Research article

First published 2017-4

Experimental study the impact forces of tumbling mills

MM Soleymani, M Fooladi Mahani, M Rezaeizadeh

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2002-10

On cutting forces in peripheral milling of curved surfaces

L Zhang, L Zheng, Z-H Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2026-1

Research on TA2 dry/wet milling force–vibration characteristics and vibration prediction model

Xin Wang, Shuncai Li, Zizhou Guo [...]

Noise & Vibration Worldwide

Retricted access

Research article

First published 2021-6

Modeling of dynamic milling forces considering the interlaminar effect during milling multidirectional CFRP laminate

Fuji Wang, Guangjian Bi, Fuda Ning

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2024-11

Analysis of exit delamination mechanism and critical axial force in ball helical milling of CFRP

Haiyan Wang, Wanchun Yu, Yan Feng [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2012-7

Investigation of the effect of cutting speed and vibration amplitude on cutting forces in ultrasonic-assisted milling

Mohammad M Abootorabi Zarchi, Mohammad R Razfar, Amir Abdullah

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2003-7

An investigation of cutting forces in horizontal-mode peripheral milling of curved surfaces

L Zhang, L Zheng, Z-H Zhang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results