Sage Journals: Discover world-class research

Retricted access

Research article

First published 2015-1

Elevated temperature tribological properties of AlTiN coating up to 700°C

A. H. Liu, J. X. Deng

Surface Engineering

Free access

Research article

First published 2018-4

Performance of AlTiN- and diamond-coated carbide tools in dry high-speed milling of electro discharge machining graphite

Yinchao Xu, Kanghua Chen, Shequan Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2024-3

Performance analysis of twin-layer AlTiN and TiCN coated inserts during high speed turning of SS304 with synthetic coolant at 0°C

Pravin Patil, Prasad Karande

Tribology - Materials,Surfaces & Interfaces

Retricted access

Research article

First published 2022-3

Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning

Anshuman Das, Miyaz Kamal, Sudhansu Ranjan Das [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2024

Drilling performance analysis on super duplex stainless steel (AISI 2507) using scalable pulse power plasma TiSiN- and AlTiN-coated tools and optimizing machining parameters through Taguchi–Fuzzy approach

Prajwal Agrawal, Shivam Kenche, T Sampath Kumar

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2023-4

Effects of Al,Ti,and Cr content with different interlayer configurations on tribological behavior of AlCrN and AlTiN multilayer coatings

Mustafa Alper Yilmaz, Özkan Doğuş, Cenk Türküz [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Free access

Research article

First published 2018-5

The effect of monolayer TiCN-,AlTiN-,TiAlN-and two layers TiCN + TiN- and AlTiN + TiN-coated cutting tools on tool wear,cutting force,surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloy

Emel Kuram

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2019-6

Performance of AlTiBN and AlTiTaN coatings during milling of titanium

J. Y. Yi, K. H. Chen, Y. C. Xu [...]

Surface Engineering

Free access

Research article

First published 2014-12

Effect of tool coating materials on surface roughness in micromachining of Inconel 718 super alloy

İrfan Ucun, Kubilay Aslantaş, Barış Gökçe [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2022-9

Performance evaluation of AlTiN coated carbide tools during machining of ceramic reinforced Cu-based hybrid composites under cryogenic,pure-minimum quantity lubrication and dry regimes

Serhat Şap, Üsame Ali Usca, Mahir Uzun [...]

Journal of Composite Materials

Search results