Elastic-Plastic Finite-Element Analysis of Repeated,Two-Dimensional Wheel-Rail Rolling Contact under Time-Dependent Load

Abstract

A study was performed using a finite-element model to obtain stresses, strains, and deformations for repeated, two-dimensional rolling contact of a locomotive driving wheel and a rail under time-dependent load. An advanced cyclic plasticity model was used with a commercial finite element code via a material subroutine. The time-dependent load was considered a harmonic variation of the wheel-rail normal contact force. The normal contact pressure was assumed to follow the Hertzian distribution and the tangential force followed the Carter distribution. A wavy profile is formed on the running surface of the rail subjected to the harmonic variation of the normal (vertical) contact force. The developed wavelength of the profile corresponds to the frequency of the normal contact force for the actual train speed. The creepage or rolling-sliding condition plays an important role in the residual strains and deformations, but its influence on the residual stresses is insignificant. The residual stresses at the surface decrease with increasing rolling passes and gradually tend to stabilize. The residual strains and surface displacements increase with increasing rolling cycle, but the increases in residual strain and surface displacement per rolling pass (ratchetting rate) decay. The residual stresses, strains, and deformations near the wave trough of the residual wavy deformation are larger than those near the wave crest. For any given creepage including zero value, when the number of rolling passes increases, the surface depth of the wavy-deformed surface increases but the ratchetting rate decays. The results are useful in investigating the influence of plastic deformation on rail corrugation.

Keywords

cyclic plasticity rolling contact finite element time-dependent creepage surface displacement residual stress residual strain wheel-rail

Get full access to this article

View all access options for this article.

References

Johnson

K. L.

Contact mechanics, 1985 (Cambridge University Press, Cambridge).

Jiang

Sehitoglu

Three-dimensional elastic-plastic stress analysis of rolling contact. ASME J. Tribol., 2002, 124, 699–708.

Jiang

Elastic-plastic finite element analysis of partial slip rolling contact. ASME J. Tribol., 2002, 124, 20–26.

Jiang

Sehitoglu

Modeling of cyclic ratchetting plasticity: Part I - development of constitutive equations. ASME J. Appl. Mech., 1996, 63, 720–725.

Jiang

Sehitoglu

Modeling of cyclic ratchetting plasticity: Part II - implement of the new model and comparison of theory with experiments. ASME J. Appl. Mech., 1996, 63, 726–733.

Ohno

Wang

J. D.

Kinematic hardening rules for simulation of ratchetting behavior. Eur. J. Mech. A Solids, 1994, 13, 519–531.

Hamilton

G. M.

Plastic flow in rollers loaded above the yield point. Proc. Instn Mech. Engrs, 1963, 177, 667–675.

Shima

Okada

Measurements of subsurface plastic flow in rolling contact. J. JSLE, 1981, 26, 75–80.

Hahn

G. T.

Huang

Rolling contact deformation of 1100 aluminum disks. Metall. Trans. A, 1986, 17A, 1561–1572.

10.

Carter

F. W.

On the action of a locomotive driving wheel. Proc. R. Soc. Lond., 1926, A112, 151–157.

11.

Jiang

Sehitoglu

Rolling contact stress analysis with the application of a new plasticity model. Wear, 1996, 191, 35–44.

12.

Zienkiewicz

O. C.

Emson

Bettess

A novel boundary infinite element. Int. J. Numer. Methods Eng., 1983, 19, 393–404.

13.

Owen

D. R. J.

Hinton

Finite elements in plasticity: theory and practice, 1980 (Pineridge Press Limited, Swansea).

14.

Hibbitt

Karlsson

Sorensen

ABAQUS/Standard user's manual, Inc., 2003 (ABAQUS Inc., Pawtucket, RI).

15.

Jiang

Deformation analysis of notched components and assessment of approximate methods. Fatigue Fract. Eng. Mater. Struct., 2001, 24, 729–740.

16.

Jin

Wen

Wang

Effect of rail corrugation formation on dynamical behaviour of rail vehicle and track. Proceedings of the 8th International Workshop on Railway noise, IWRN8, Buxton, Derbyshire, UK, 8–11 Septemper 2004, pp. 345–356 (Repropoint, Southampton).

17.

Jiang

Sehitoglu

Cyclic ratchetting of 1070 steel under multiaxial stress state. Int. J. Plast., 1994, 10, 579–608.

18.

Jiang

Sehitoglu

Multiaxial cyclic ratchetting under multiple step loading. Int. J. Plast., 1994, 10, 849–870.

19.

Grassie

S. L.

Kalousek

Rail corrugation: Characteristics, causes and treatments. Proc. Instn Mech. Engrs. Part F: J. Rail and Rapid Transit, 1993, 207, 57–68.

20.

Sato

Matsumoto

Knothe

Review on rail corrugation studies. Wear, 2002, 253, 130–139.

21.

Knothe

Time-dependent rolling contact and corrugation. In Rolling contact phenomena, courses and lectures (Eds Jacobson

Kalker

J. J.

) 2001, pp. 203–276, Nr. 411 (2–7 October 1999, International Centre for Mechanical Sciences, Udine, Italy) (Springer, Wien, New York).

22.

Frederick

C. O.

A rail corrugation theory. In Preceedings of the International Symposium on Contact mechanics and wear of rail/wheel systems, II, University of Kingston, Rhode Island, July 1986, pp. 181–211 (University of Waterloo Press, Waterloo).

23.

Hempelmann

Knothe

An extended linear model for the prediction of short pitch corrugation. Wear, 1996, 191, 161–169.

24.

Maller

A linear wheel-rail model to investigate stability and corrugation on straight track. Wear, 2000, 243, 122–132.

25.

Igeland

Ilias

Rail head corrugation growth predictions based on non-linear high frequency vehicle/track interaction. Wear, 1997, 213, 90–97.

26.

Nielsen

J. B.

Evolution of rail corrugation predicted with a non-linear wear model. J. Sound Vib., 1999, 227, 915–933.

27.

Andersson

Johansson

Prediction of rail corrugation generated by three-dimensional wheel-rail interaction. Wear, 2004, 257, 423–434.

28.

Jin

Wen

Wang

Zhang

Effect of a scratch on curved rail on initiation and evolution of rail corrugation. Tribol. Int., 2004, 37, 385–394.

29.

Bahmer

Klimpel

Plastic deformation of corrugated rails - a numerical approach using material data of rail steel. Wear, 2002, 253, 150–161.