Multipass low-plasticity burnishing induced residual stresses: Three-dimensional elastic-plastic finite element modelling

Abstract

Low-plasticity burnishing (LPB) is a surface modification process involving complex cyclic plastic deformation that results in the development of a deep residual stress field. In order to achieve an optimal LPB-induced residual stress field for the geometry appropriate to the aircraft engine component, the key parameters of the LPB process, such as burnishing load, burnishing ball size and material properties, need to be determined. For this purpose, a three-dimensional non-linear moving contact finite element model is proposed to simulate the multipass LPB process and to predict the effects of those parameters on the resultant residual stress field. The material constitutive model used in the finite element analysis has been developed from the cyclic stress/strain response obtained from experimental measurements on the material. Prediction of the LPB-induced residual stresses by the finite element model appears to agree reasonably well with X-ray diffraction measurements.