Spatially and temporally controlled drug delivery is an important field to address the limitations of conventional pharmaceutical administration. While many effective controlled drug delivery systems exist, the repertoire of systems that additionally present a beneficial mechanical environment to cells remains scarce. To address this, a comprehensive release study of fluorescein as a model drug, and the corticosteroid dexamethasone, from poly(N-isopropylacrylamide)/polypyrrole (pNIPAM/PPy) conducting polymer hydrogels is presented within this study. Cyclic voltammetry and scanning electron microscopy (SEM) indicated that having the pNIPAM hydrogel phase present and doping with drugs reduced PPy thickness and shifted/suppressed redox peaks to some degree but not enough to prevent release. Fluorescein release was initiated by constant reduction, with a maximum of 54.5 ± 6.8 µg/cm2 from PPy films and 6.3 ± 1.1 µg/cm2 from pNIPAM/PPy. The quantity of fluorescein released was shown to be tunable by modulating the charge passed during PPy electropolymerization. Fluorescein-loaded pNIPAM/PPy samples were capable of multiple cycles of depletion and reloading via re-incorporation through re-oxidation in a fluorescein solution. The stability of pNIPAM/PPy regarding drug release was demonstrated, with no difference in release profiles and quantities after soaking samples for 1, 8, and 15 days. Interestingly, constant reduction did not elicit release of dexamethasone, while a biphasic pulsed potential of ±0.8 V at 0.5 Hz was effective. Minimal leaching of dexamethasone without stimulation was shown, alongside a multi-day, multi-triggerable release profile upon short stimulations. pNIPAM/PPy conducting polymer hydrogels are a promising platform for on/off drug delivery, with a nondegrading matrix, minimal passive drug-leaching, and where the drug payload can be reloaded, all while providing a suitable mechanical environment to interface with living cells.
Impact Statement
This work demonstrates the inclusion and release of small-molecule drugs from conducting polymer hydrogels, in an electrically triggered manner. This enables the release of drugs to cells in cell culture models, while ensuring a suitable mechanical microenvironment via the hydrogel component. The ability to reload the conducting polymer hydrogel with drug after release is demonstrated, along with excellent control over drug release, with minimal release without an electrical trigger.
Puiggalí-JouA, del ValleLJ, AlemánC. Drug delivery systems based on intrinsically conducting polymers. J Control Release, 2019; 309:244–264; doi: 10.1016/j.jconrel.2019.07.035
2.
AtanaseLI. Micellar drug delivery systems based on natural biopolymers. Polymers (Basel), 2021; 13(3):477; doi: 10.3390/polym13030477
3.
TomaliaDA. Birth of a new macromolecular architecture: dendrimers as quantized building blocks for nanoscale synthetic polymer chemistry. Prog Polym Sci, 2005; 30(3–4):294–324; doi: 10.1016/j.progpolymsci.2005.01.007
4.
WangJ, LiB, QiuL, et al.Dendrimer-based drug delivery systems: History, challenges, and latest developments. J Biol Eng, 2022; 16(1):18; doi: 10.1186/s13036-022-00298-5
5.
Herrera EstradaLP, ChampionJA. Protein nanoparticles for therapeutic protein delivery. Biomater Sci, 2015; 3(6):787–799; doi: 10.1039/c5bm00052a
6.
Beltrán-GraciaE, López-CamachoA, Higuera-CiaparaI, et al.Nanomedicine review: Clinical developments in liposomal applications. Cancer Nano, 2019; 10(1); doi: 10.1186/s12645-019-0055-y
7.
PattniBS, ChupinVV, TorchilinVP. New developments in liposomal drug delivery. Chem Rev, 2015; 115(19):10938–10966; doi: 10.1021/acs.chemrev.5b00046
8.
HuX, ZhangY, DingT, et al.Multifunctional gold nanoparticles: A novel nanomaterial for various medical applications and biological activities. Front Bioeng Biotechnol, 2020; 8:990; doi: 10.3389/fbioe.2020.00990
9.
ZhangQ, WangX, LiPZ, et al.Biocompatible, uniform, and redispersible mesoporous silica nanoparticles for cancer-targeted drug delivery in vivo. Adv Funct Mater, 2014; 24(17); doi: 10.1002/adfm.201302988
10.
DadfarSM, RoemhildK, DrudeNI, et al.Iron oxide nanoparticles: Diagnostic, therapeutic and theranostic applications. Adv Drug Deliv Rev, 2019; 138:302–325; doi: 10.1016/j.addr.2019.01.005
11.
AlshehriR, IlyasAM, HasanA, et al.Carbon nanotubes in biomedical applications: Factors, mechanisms, and remedies of toxicity. J Med Chem, 2016; 59(18):8149–8167; doi: 10.1021/acs.jmedchem.5b01770
12.
PhamSH, ChoiY, ChoiJ. Stimuli-responsive nanomaterials for application in antitumor therapy and drug delivery. Pharmaceutics, 2020; 12(7):630; doi: 10.3390/pharmaceutics12070630
13.
BlumAP, KammeyerJK, RushAM, et al.Stimuli-responsive nanomaterials for biomedical applications. J Am Chem Soc, 2015; 137(6):2140–2154; doi: 10.1021/ja510147n
14.
MuJ, LinJ, HuangP, et al.Development of endogenous enzyme-responsive nanomaterials for theranostics. Chem Soc Rev, 2018; 47(15):5554–5573; doi: 10.1039/c7cs00663b
15.
StewartSA, Domínguez-RoblesJ, DonnellyRF, et al.Implantable polymeric drug delivery devices: Classification, manufacture, materials, and clinical applications. Polymers (Basel), 2018; 10(12):1379; doi: 10.3390/polym10121379
16.
AlqahtaniMS, KaziM, AlsenaidyMA, et al.Advances in oral drug delivery. Front Pharmacol, 2021; 12:618411; doi: 10.3389/fphar.2021.618411
17.
MamidiN, Franco De SilvaF, Orash MahmoudsalehiA. Advanced disease therapeutics using engineered living drug delivery systems. Nanoscale, 2025; 17(13):7673–7696; doi: 10.1039/D4NR05298F
18.
EzikeTC, OkpalaUS, OnojaUL, et al.Advances in drug delivery systems, challenges and future directions. Heliyon, 2023; 9(6):e17488; doi: 10.1016/j.heliyon.2023.e17488
19.
ChandrakalaV, ArunaV, AngajalaG. Review on metal nanoparticles as nanocarriers: Current challenges and perspectives in drug delivery systems. Emergent Mater, 2022; 5(6):1593–1615; doi: 10.1007/s42247-021-00335-x
20.
TranKTM, NguyenTD. Lithography-based methods to manufacture biomaterials at small scales. J Sci Adv Mater Devices, 2017; 2(1):1–14; doi: 10.1016/j.jsamd.2016.12.001
21.
IlkhanizadehS, TeixeiraAI, HermansonO. Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation. Biomaterials, 2007; 28(27):3936–3943; doi: 10.1016/j.biomaterials.2007.05.018
22.
WadeRJ, BassinEJ, GramlichWM, et al.Nanofibrous hydrogels with spatially patterned biochemical signals to control cell behavior. Adv Mater, 2015; 27(8):1356–1362; doi: 10.1002/adma.201404993
23.
XiaT, LiuW, YangL. A review of gradient stiffness hydrogels used in tissue engineering and regenerative medicine. J Biomed Mater Res A, 2017; 105(6):1799–1812; doi: 10.1002/jbm.a.36034
24.
EnglerAJ, GriffinMA, SenS, et al.Myotubes differentiate optimally on substrates with tissue-like stiffness: Pathological implications for soft or stiff microenvironments. J Cell Biol, 2004; 166(6):877–887; doi: 10.1083/jcb.200405004
25.
TseJR, EnglerAJ. Preparation of hydrogel substrates with tunable mechanical properties. Curr Protoc Cell Biol, 2010(SUPPL. 47):1–16; doi: 10.1002/0471143030.cb1016s47
26.
AnnabiN, NicholJW, ZhongX, et al.Controlling the porosity and microarchitecture of hydrogels for tissue engineering. Tissue Eng Part B Rev, 2010; 16(4):371–383; doi: 10.1089/ten.teb.2009.0639
27.
HuangC, YeQ, DongJ, et al.Biofabrication of natural Au/bacterial cellulose hydrogel for bone tissue regeneration via in-situ fermentation. Smart Mater Med, 2023; 4; doi: 10.1016/j.smaim.2022.06.001
28.
LeijtenJ, SeoJ, YueK, et al.Spatially and temporally controlled hydrogels for tissue engineering. Mater Sci Eng R Rep, 2017; 119:1–35; doi: 10.1016/j.mser.2017.07.001
29.
DreissCA. Hydrogel design strategies for drug delivery. Curr Opin Colloid Interface Sci, 2020; 48:1–17; doi: 10.1016/j.cocis.2020.02.001
30.
VigataM, MeinertC, HutmacherDW, et al.Hydrogels as drug delivery systems: A review of current characterization and evaluation techniques. Pharmaceutics, 2020; 12(12):1188; doi: 10.3390/pharmaceutics12121188
31.
HoareTR, KohaneDS. Hydrogels in drug delivery: Progress and challenges. Polymer (Guildf), 2008; 49(8):1993–2007; doi: 10.1016/j.polymer.2008.01.027
32.
LiJ, MooneyDJ. Designing hydrogels for controlled drug delivery. Nat Rev Mater, 2016; 1(12):16071; doi: 10.1038/natrevmats.2016.71
33.
MamidiN, De SilvaFF, VacasAB, et al.Multifaceted hydrogel scaffolds: Bridging the gap between biomedical needs and environmental sustainability. Adv Healthcare Materials, 2024; 13(27):2401195; doi: 10.1002/adhm.202401195
34.
MamidiN, Velasco DelgadilloRM, BarreraEV. Covalently functionalized carbon nano-onions integrated gelatin methacryloyl nanocomposite hydrogel containing γ-cyclodextrin as drug carrier for high-performance ph-triggered drug release. Pharmaceuticals (Basel), 2021; 14(4):291; doi: 10.3390/ph14040291
35.
KopačT, RučigajA, KrajncM. The mutual effect of the crosslinker and biopolymer concentration on the desired hydrogel properties. Int J Biol Macromol, 2020; 159:557–569; doi: 10.1016/j.ijbiomac.2020.05.088
36.
LiH, ZhuX, WangM, et al.Drug sustained release from degradable drug-loaded in-situ hydrogels in the posterior eye: A mechanistic model and analytical method. J Biomech, 2022; 136:111052; doi: 10.1016/j.jbiomech.2022.111052
37.
BertzA, Wöhl-BruhnS, MietheS, et al.Encapsulation of proteins in hydrogel carrier systems for controlled drug delivery: Influence of network structure and drug size on release rate. J Biotechnol, 2013; 163(2):243–249; doi: 10.1016/j.jbiotec.2012.06.036
38.
HamaR, UlziibayarA, ReinhardtJW, et al.Recent developments in biopolymer-based hydrogels for tissue engineering applications. Biomolecules, 2023; 13(2):280; doi: 10.3390/biom13020280
39.
GriffinDR, SchlosserJL, LamSF, et al.Synthesis of photodegradable macromers for conjugation and release of bioactive molecules. Biomacromolecules, 2013; 14(4):1199–1207; doi: 10.1021/bm400169d
40.
HsuRS, ChenPY, FangJH, et al.Adaptable microporous hydrogels of propagating ngf-gradient by injectable building blocks for accelerated axonal outgrowth. Adv Sci (Weinh), 2019; 6(16):1900520; doi: 10.1002/advs.201900520
41.
OuyangJ. Application of intrinsically conducting polymers in flexible electronics. SmartMat, 2021; 2(3):263–285; doi: 10.1002/smm2.1059
42.
YangJ, LiuY, LiuS, et al.Conducting polymer composites: Material synthesis and applications in electrochemical capacitive energy storage. Mater Chem Front, 2017; 1(2):251–268; doi: 10.1039/c6qm00150e
43.
DechtriratD, SookcharoenpinyoB, PrajongtatP, et al.An electrochemical MIP sensor for selective detection of salbutamol based on a graphene/PEDOT:PSS modified screen printed carbon electrode. RSC Adv, 2018; 8(1):206–212; doi: 10.1039/c7ra09601a
44.
MellingD, MartinezJG, JagerEWH. Conjugated polymer actuators and devices: Progress and opportunities. Adv Mater, 2019; 31(22):e1808210; doi: 10.1002/adma.201808210
45.
LangerR. New methods of drug delivery. Science, 1990; 249(4976):1527–1533; doi: 10.1126/science.2218494
46.
ZingerB, MillerLL. Timed release of chemicals from polypyrrole films. J Am Chem Soc, 1984; 106(22):6861–6863; doi: 10.1021/ja00334a076
47.
SvirskisD, Travas-SejdicJ, RodgersA, et al.Electrochemically controlled drug delivery based on intrinsically conducting polymers. J Control Release, 2010; 146(1):6–15; doi: 10.1016/j.jconrel.2010.03.023
48.
BoehlerC, OberueberF, AsplundM. Tuning drug delivery from conducting polymer films for accurately controlled release of charged molecules. J Control Release, 2019; 304:173–180; doi: 10.1016/j.jconrel.2019.05.017
49.
RichardsonRT, WiseAK, ThompsonBC, et al.Polypyrrole-coated electrodes for the delivery of charge and neurotrophins to cochlear neurons. Biomaterials, 2009; 30(13):2614–2624; doi: 10.1016/j.biomaterials.2009.01.015
WadhwaR, LagenaurCF, CuiXT. Electrochemically controlled release of dexamethasone from conducting polymer polypyrrole coated electrode. J Control Release, 2006; 110(3):531–541; doi: 10.1016/j.jconrel.2005.10.027
52.
KleberC, BrunsM, LienkampK, et al.An interpenetrating, microstructurable and covalently attached conducting polymer hydrogel for neural interfaces. Acta Biomater, 2017; 58:365–375; doi: 10.1016/j.actbio.2017.05.056
53.
KhaliliA, NoziereR, Tuberty-VaughanE, et al.Self-actuating multilayer scaffold for skeletal muscle tissue engineering. Polymers for Advanced Techs, 2022; 33(10):3228–3237; doi: 10.1002/pat.5774
54.
Pérez-MartínezCJ, Morales ChávezSD, Del Castillo-CastroT, et al.Electroconductive nanocomposite hydrogel for pulsatile drug release. React Funct Polym, 2016; 100:12–17; doi: 10.1016/j.reactfunctpolym.2015.12.017
55.
ZhouK, HeY, XuQ, et al.A hydrogel of ultrathin pure polyaniline nanofibers: Oxidant-templating preparation and supercapacitor application. ACS Nano, 2018; 12(6):5888–5894; doi: 10.1021/acsnano.8b02055
56.
ChenZ, ToJWF, WangC, et al.A three-dimensionally interconnected carbon nanotube-conducting polymer hydrogel network for high-performance flexible battery electrodes. Adv Energy Mater, 2014; 4(12); doi: 10.1002/aenm.201400207
57.
SłoniewskaA, PałysB. Supramolecular polyaniline hydrogel as a support for urease. Electrochim Acta, 2014; 126:90–97; doi: 10.1016/j.electacta.2013.10.164
58.
BansalM, DravidA, AqraweZ, et al.Conducting polymer hydrogels for electrically responsive drug delivery. J Control Release, 2020; 328:192–209; doi: 10.1016/j.jconrel.2020.08.051
59.
HorrocksMS, ZhurenkovKE, MalmströmJ. Conducting polymer hydrogels for biomedical application: Current status and outstanding challenges. APL Bioeng, 2024; 8(3):e031503; doi: 10.1063/5.0218251
KleberC, LienkampK, RüheJ, et al.Electrochemically controlled drug release from a conducting polymer hydrogel (PDMAAp/PEDOT) for local therapy and bioelectronics. Adv Healthc Mater, 2019; 8(10):e1801488; doi: 10.1002/adhm.201801488
62.
CheahE, BansalM, NguyenL, et al.Electrically responsive release of proteins from conducting polymer hydrogels. Acta Biomater, 2023; 158:87–100; doi: 10.1016/j.actbio.2023.01.013
63.
BansalM, RaosB, AqraweZ, et al.An interpenetrating and patternable conducting polymer hydrogel for electrically stimulated release of glutamate. Acta Biomater, 2022; 137:124–135; doi: 10.1016/j.actbio.2021.10.010
64.
SirivisootS, ParetaR, WebsterTJ. Electrically controlled drug release from nanostructured polypyrrole coated on titanium. Nanotechnology, 2011; 22(8):e085101; doi: 10.1088/0957-4484/22/8/085101
65.
RamtinA, SeyfoddinA, CoutinhoFP, et al.Cytotoxicity considerations and electrically tunable release of dexamethasone from polypyrrole for the treatment of back-of-the-eye conditions. Drug Deliv Transl Res, 2016; 6(6):793–799; doi: 10.1007/s13346-016-0284-0
66.
ZhangB, MolinoPJ, HarrisAR, et al.Conductive and protein resistant polypyrrole films for dexamethasone delivery. J Mater Chem B, 2016; 4(15):2570–2577; doi: 10.1039/c5tb00574d
67.
ZhurenkovKE, AkbarinejadA, PorrittH, et al.Colloidal probe technique optimization for determination of young’s modulus of soft adhesive hydrogels. Langmuir, 2024; 40(30):15491–15502; doi: 10.1021/acs.langmuir.4c01047
68.
TingMS, VellaJ, RaosBJ, et al.Conducting polymer hydrogels with electrically-tuneable mechanical properties as dynamic cell culture substrates. Biomater Adv, 2022; 134:112559; doi: 10.1016/j.msec.2021.112559
69.
TingMS, NarasimhanBN, Travas-SejdicJ, et al.Soft conducting polymer polypyrrole actuation based on poly(N-isopropylacrylamide) hydrogels. Sensors Actuators, B Chem, 2021; 343(April):130167; doi: 10.1016/j.snb.2021.130167
BrahimS, Guiseppi-ElieA. Electroconductive hydrogels: Electrical and electrochemical properties of polypyrrole-poly(HEMA) composites. Electroanalysis, 2005; 17(7):556–570; doi: 10.1002/elan.200403109
72.
GhoshS, InganäsO. Electrochemical Characterization of Poly(3,4-ethylene dioxythiophene) Based Conducting Hydrogel Networks. J Electrochem Soc, 2000; 147(5):1872; doi: 10.1149/1.1393450
73.
BradburyCR, ZhaoJ, FermínDJ. Distance-independent charge-transfer resistance at gold electrodes modified by thiol monolayers and metal nanoparticles. J Phys Chem C, 2008; 112(27):10153–10160; doi: 10.1021/jp710165d
74.
AnthiJ, VaněčkováE, SpasovováM, et al.Probing charge transfer through antifouling polymer brushes by electrochemical methods: The impact of supporting self-assembled monolayer chain length. Anal Chim Acta, 2023; 1276:341640; doi: 10.1016/j.aca.2023.341640
75.
DiaoP, JiangD, CuiX, et al.Studies of structural disorder of self-assembled thiol monolayers on gold by cyclic voltammetry and ac impedance. J Electroanal Chem, 1999; 464(1):61–67; doi: 10.1016/S0022-0728(98)00470-7
76.
TingMS, VellaJ, RaosBJ, et al.Conducting polymer hydrogels with electrically-tuneable mechanical properties as dynamic cell culture substrates. Mater Sci Eng C, 2021; doi: 10.1016/j.msec.2021.112559
77.
JiaZ, WangX, WeiX, et al.Micelle-forming dexamethasone prodrug attenuates nephritis in lupus-prone mice without apparent glucocorticoid side effects. ACS Nano, 2018; 12(8):7663–7681; doi: 10.1021/acsnano.8b01249
78.
SiposB, CsókaI, Budai-SzűcsM, et al.Development of dexamethasone-loaded mixed polymeric micelles for nasal delivery. Eur J Pharm Sci, 2021; 166:105960; doi: 10.1016/j.ejps.2021.105960
79.
LeprinceL, DogimontA, MagninD, et al.Dexamethasone electrically controlled release from polypyrrole-coated nanostructured electrodes. J Mater Sci Mater Med, 2010; doi: 10.1007/s10856-010-4008-6
80.
SeyfoddinA, ChanA, ChenWT, et al.Electro-responsive macroporous polypyrrole scaffolds for triggered dexamethasone delivery. Eur J Pharm Biopharm, 2015; 94:419–426; doi: 10.1016/j.ejpb.2015.06.018
81.
UppalapatiD, SharmaM, AqraweZ, et al.Micelle directed chemical polymerization of polypyrrole particles for the electrically triggered release of dexamethasone base and dexamethasone phosphate. Int J Pharm, 2018; 543(1–2):38–45; doi: 10.1016/j.ijpharm.2018.03.039
82.
ShahSAA, FirlakM, BerrowSR, et al.Electrochemically enhanced drug delivery using polypyrrole films. Materials (Basel), 2018; 11(7):1123; doi: 10.3390/ma11071123
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
