Solution blowing is an innovative process for spinning nanofibers from polymer solutions using high-velocity gas flow as fiber-forming driving force. Polyacrylonitrile (PAN) nanofibers were prepared using PAN solutions in N, N-Dimethylformamide and the morphologies of the fibers were examined using a scanning electron microscope. The process parameters including solution concentration, gas pressure supplied to the gas cavity, and solution-feeding rate were varied to investigate their effects on the morphologies of the fibers. PAN fibers were successfully prepared in the form of a nonwoven web. The fiber diameters mostly ranged in hundreds of nanometers and were affected by the process parameters. Results indicated that solution blowing is an alternative technique for manufacturing nonwoven webs that consist of micro- and nanofibers.
ZhouF., and GongR.: Manufacturing technologies of polymeric nanofibres and nanofibre yarns. Polymer International, 57, 837–845 (2008).
2.
TeoW., and RamakrishnaS.: Electrospun nanofibers as a platform for multifunctional, hierarchically organized nanocomposite. Composites Science and Technology, 69, 1804–1817 (2009).
3.
GreinerA., and WendorffJ.H.: Electrospinning: a fascinating method for the preparation of ultrathin fibers. Angew. Chem. Int. Ed., 46, 5670–5703 (2007).
4.
ChiuH. T., LinJ. M., ChengT. H., ChouS. Y.: Fabrication of electrospun polyacrylonitrile ion-exchange membranes for application in lysozym, eXPRESS Polymer Letters5, 308–317 (2011).
5.
ChoD.: Structural properties and superhydrophobicity of electrospun polypropylene fibers from solution and melt. Polymer, 51, 6005–6012 (2010).
YuJ.H., FridrikhS.V., and RutledgeG.C.: Production of submicrometer diameter fibers by two-fluid electrospinning. Advanced Materials, 16, 1562–1566 (2004).
ZhouW.: Gas flow-assisted alignment of super long electrospun nanofibers. Journal of Nanoscience and Nanotechnology, 7, 2667–2673 (2007).
10.
ChenH.M., and YuD.G., An elevated temperature electrospinning process for preparing acyclovir-loaded PAN ultrafine fibers. Journal of Materials Processing Technology, 210, 1551–1555 (2010).
11.
GopalanA.I.: Development of electrospun PVdF-PAN membrane-based polymer electrolytes for lithium batteries. Journal of Membrane Science, 325, 683–690 (2008).
12.
KimJ.R.: Electrospun PVdF-based fibrous polymer electrolytes for lithium ion polymer batteries. Electrochimica Acta, 50, 69–75 (2004).
13.
ZhouF., GongR., and PoratI.: Mass production of nanofibre assemblies by electrostatic spinning. Polymer International, 58, 331–342 (2009).
14.
VaresanoA.: Multi-jet nozzle electrospinning on textile substrates: observations on process and nanofibre mat deposition. Polymer International, 59, 1606–1615 (2010).
15.
LuB., WangY., LiuY.X.: Superhigh-throughput needleless electrospinning using a rotary cone as spinneret. Small, 6, 1612–1616 (2010).
16.
LarsenG., SpretzR., and Velarde-OrtizR.: Use of coaxial gas jackets to stabilize taylor cones of volatile solutions and to induce particle-to-fiber transitions. Advanced Materials, 16, 166–169 (2004).
17.
LinY.: Preparation of poly (ether sulfone) nanofibers by gas–jet /electrospinning. Journal of Applied Polymer Science, 107, 909–917 (2008).
18.
EllisonC.J.: Melt blown nanofibers: Fiber diameter distributions and onset of fiber breakup. Polymer, 48, 3306–3316 (2007).
19.
KrutkaH.M.: Analysis of melt blowning dies using computational fluid dynmics.University of Oklahoma, (2007).
20.
MengK., WangX., and HuangX.: Numerical analysis of the stagnation phenomenon in the coat-hanger die of melt blowing process. Journal of Applied Polymer Science, 108, 2523–2527 (2008).
21.
NguiM.O., and MallapragadaS.K.: Mechanistic investigation of drying regimes during solvent removal from poly (vinyl alcohol) films. Journal of Applied Polymer Science, 72, 1913–1920 (1999).
22.
MedeirosE.S.: Solution blow spinning: a new method to produce micro- and nanofibers from polymer solutions. Journal of Applied Polymer Science, 113, 2322–2330 (2009).
23.
ZhangL.F.: Generation of polymer ultrafine fibers through solution (air-) blowing. Journal of Applied Polymer Science, 114, 3479–3486 (2009).
24.
ZhangC.X., YuanX.Y., WuL.L., HanY.: Study on morphology of electrospun poly(vinyl alcohol) mats, European Polymer Journal, 41, 423–432 (2005)
25.
YunK.M.: Nanoparticle filtration by electrospun polymer fibers. Chemical Engineering Science, 62, 4751–4759 (2007).
26.
YunK.M.: Morphology optimization of polymer nanofiber for applications in aerosol particle filtration. Separation and Purification Technology, 75, 340–345 (2010).
27.
VitchuliN.: Electrospun ultrathin nylon fibers for protective applications. Journal of Applied Polymer Science, 116, 2181–2187 (2010).
28.
Daneleviciute-VaisnieneA., KatunskisJ., and BuikaG., Electrospun PVA Nanofibres for Gas Filtration Applications. Fibres & Textiles In Eastern Europe, 17, 40–43 (2009).
29.
ZhangS., ShimW.S., and KimJ.: Design of ultra-fine nonwovens via electrospinning of Nylon 6: Spinning parameters and filtration efficiency. Materials & Design, 30, 3659–3666 (2009).
30.
BarhateR.S., and RamakrishnaS.: Nanofibrous filtering media: Filtration problems and solutions from tiny materials. Journal of Membrane Science, 296, 1–8 (2007).
31.
LeeY.C., and WadsworthL.C., Structure and filtration properties of melt blown polypropylene webs. Polymer Engineering and Science, 30, 1413–1419 (1990).
