A model study on the influence of some heavy metal ions on the stability and vulcanization efficiency of uncompounded and compounded high-ammonia natural rubber (HANR) latex was carried out by an exogenous addition and then determined by Brookfield viscometer, mechanical stability time (MST) tester, and tensile testing machine. The case of pre-vulcanized HANR latex with different aging times was determined by the change in the volatile fatty acid (VFA) number, MST, and viscosity. The compounded HANR latex was coagulated by adding Mn2+and Mg2+ while it was unaltered by adding Zn2+, Fe2+, and Cu2+ ions, leading to their colloidal stability. Therefore, these metal ions were chosen further to study the pre-vulcanization of compounded HANR latex. The presence of Zn2+, Fe2+, and Cu2+ in the latex is responsible for the delay in the vulcanization process and changes the appearance of compounded latex. Before compounding, the addition of such metal ions led to the reduction in tensile strength of the obtained gloves. At the same time, there was no effect on the tensile properties of the gloves made from the compounded HANR latex containing the metal ions.
YipECacioliP. The manufacture of gloves from natural rubber latex. J Allergy Clin Immunol2002; 110: S3–S14.
2.
SasidharanKKPalatySGopalakrishnanKS, et al.Room temperature prevulcanization of natural rubber latex using xanthate. J Appl Polym Sci2004; 94: 1164–1174.
3.
GuangLHepingYYongzhouW, et al.Preparation and mechanical properties of prevulcanized natural rubber Latex/Chitosan/Poly (3-hydroxybutyrate) blends. In: 2015 Asia-Pacific Energy Equipment Engineering Research Conference,Zhuhai, China, 2015/06 2015. Atlantis Press, pp. 269–272.
4.
HoCCKhewMC. Surface morphology of prevulcanized natural rubber latex films by atomic force microscopy: new insight into the prevulcanization mechanism. Langmuir1999; 15: 6208–6219.
5.
SasidharanKKJosephRPalatyS, et al.Effect of the vulcanization time and storage on the stability and physical properties of sulfur-prevulcanized natural rubber latex. J Appl Polym Sci2005; 97: 1804–1811.
6.
TangboriboonratPLerthititrakulC. Morphology of natural rubber latex particles prevulcanised by sulphur and peroxide systems. Colloid Polym Sci2002; 280: 1097–1103.
7.
VarkeyJTRaoSSThomasS. Effect of prevulcanization on the rheological behavior of natural rubber/styrene-butadiene rubber latex blends. J Appl Polym Sci1996; 62: 2169–2180.
8.
IbarraLAlzorrizM. Ionic elastomers based on carboxylated nitrile rubber and magnesium oxide. J Appl Polym Sci2007; 103: 1894–1899.
9.
IbarraLMarcos-FernandezAAlzorrizM. Mechanistic approach to the curing of carboxylated nitrile rubber (XNBR) by zinc peroxide/zinc oxide. Polymer2002; 43: 1649–1655.
10.
ChokanandsombatYSirisinhaC. MgO and ZnO as reinforcing fillers in cured polychloroprene rubber. J Appl Polym Sci2013; 128: 2533–2540.
11.
SahooSMaitiMGangulyA, et al.Effect of zinc oxide nanoparticles as cure activator on the properties of natural rubber and nitrile rubber. J Appl Polym Sci2007; 105: 2407–2415.
12.
SoaresBG. Rubber nanocomposites with metal oxides as nanofillers. In: ThomasSMariaH (eds) Progress in Rubber Nanocomposites. 1st ed.Amsterdam: Elsevier, 2016.
13.
BlackleyDC. High Polymer Latices. 2nd ed.London: Palmerton, 1966, pp. 3–5.
14.
ISO 124. Latex, Rubber—Determination of Total Solids Content. Switzerland: International Organization for Standardization, 2014.
15.
ISO 126. Natural Rubber Latex Concentrate—Determination of Dry Rubber Content. Switzerland: International Organization for Standardization, 2005.
16.
ISO 506. Rubber Latex, Natural, Concentrate—Determination of Volatile Fatty Acid Number. Switzerland: International Organization for Standardization, 1992.
17.
ISO 127. Rubber, Natural Latex Concentrate—Determination of KOH Number. Switzerland: International Organization for Standardization, 2018.
18.
KarunanayakeLKumaraPHSNandasenaWW, et al.Magnesium content in natural rubber latex. Bull Rubber Res Inst Sri Lanka1998; 37: 36–39.
ISO 1652. Rubber Latex—Determination of Apparent Viscosity by the Brookfield Test Method. Switzerland: International Organization for Standardization, 2004.
21.
ISO 35. Natural Rubber Latex Concentrate—Determination of Mechanical Stability. Switzerland: International Organization for Standardization, 2004.
22.
WongNP. Latex compounding, testing and prevulcanisation. In: Latex Concentrate Production and Introduction to Latex Product Manufacture. Kuala Lumpur: Rubber Research Institute of Malaysia, 1992, pp. 65–92.
23.
SriringMNimpaiboonAKumarnS, et al.Viscoelastic and mechanical properties of large- and small-particle natural rubber before and after vulcanization. Polym Test2018; 70: 127–134.
24.
JohnFP. Principles of Polymer Chemistry. 1st ed.New York: Springer, 1953, p. 29.
25.
FloryPJ. Statistical mechanics of swelling of network structures. J Chem Phys1950; 18: 108–111.
KarunanayakeLPereraGMP. Effect of magnesium and phosphate ions on the stability of concentrated natural rubber latex and the properties of natural rubber latex-dipped products. J Appl Polym Sci2006; 99: 3120–3124.
28.
ChakrabortySMandotSKAgrawalSL, et al.Study of metal poisoning in natural rubber-based tire-tread compound. J Appl Polym Sci2005; 98: 1492–1499.
29.
SriringMNimpaiboonADechnarongN, et al.Pre-vulcanization of large and small natural rubber latex particles: Film-forming behavior and mechanical properties. Macromolecular Mater Eng2019; 304: 1900283.
30.
GanS-NTingK-F. Effect of treating latex with some metal ions on storage hardening of natural rubber. Polymer1993; 34: 2142–2147.
31.
TarachiwinLSakdapipanichJTanakaY. Gel Formation in Natural Rubber Latex: 2. Effect of Magnesium Ion. Rubber Chem Technol2003; 76: 1185–1193.
