Structural Health Monitoring of Fiber-reinforced Composite Plates for Low-velocity Impact Damage using Ultrasonic Lamb Wave Tomography

Abstract

The feasibility of imaging low-velocity impact damage in thin multi-layered composite plates using Lamb wave tomography is explored. Low-velocity impact damages (6-20 J) are induced by the drop-weight method on graphite fiber epoxy matrix composite laminates of cross-ply and quasi-isotropic lay-up and the damage assessment is carried out by conventional C-scans and ultrasonic Lamb wave tomography. Lamb wave based tomography based on modified cross-hole sensor configuration is used to image the damage as a function of impact energy for graphite composite plates. The reconstructed tomograms are able to capture the lateral extent of the damage even for impact energies as low as 11 J in a 2 mm graphite epoxy quasi-isotropic lay-up sample that can be classified as barely visible impact damage.

Keywords

structural health monitoring low-velocity impact damages Lamb wave tomography delamination composite materials barely visible impact damages

Get full access to this article

View all access options for this article.

References

Mahadev, Prasad, S. , Balasubramaniam, K. and Krishnamurthy, C. V. (2004). Structural health monitoring of composite structures using Lamb wave tomography . Smart Mater. Struct., 13, N73-N79 .

Rokhlin, S. I. (1980). Diffraction of Lamb waves by a finite crack in an elastic layer . J. Acoust. Soc. America, 67, 1157-1165 .

Baker, A. A. , Jones, R. and Callinan, R. J. (1985). Damage tolerance of graphite/epoxy composites . Composite Structures, 4, 15-44 .

Cantwell, W. J. and Moron, J. (1991). The impact resistance of composite materials - a review . Composites, 22(5), 347-362 .

Cantwell, W. J. and Moron, J. (1989). Comparison of the low and high velocity impact response of CFRP . Composite, 20(6), 545-551 .

Victorov, I. A. (1967). Rayleigh and Lamb Waves, New York: Plenum Press .

Rose, J. L. (1999). Ultrasonic Waves in Solid Media, Cambridge University Press, UK .

Kessler, S. (2002). Piezoelectric based in-situ damage detection of composite materials for structural health monitoring systems. PhD Thesis, Cambridge, USA: Massachusetts Institute of Technology.

Disperse-User’s Manual (2001). Disperse Software User’s Manual, UK: Imperial College .

10.

Luangvilai, K. , Punurai, W. and Jacobs, L. J. (2002). Guided Lamb wave propagation in composite plate/concrete component . Journal of Engineering Mechanics, 128(12), 1337-1341 .

11.

Sullivan, R. , Balasubramaniam, K. and Bennett, A. G. (1994). Experimental imaging of fiber orientation in multi-layered graphite epoxy composite structures, In: Thompson, D. O. and Chimenti, D. E. (eds), Review of Progress in QNDE, Vol. 13, pp. 1313-1320, N.Y.: Plenum Press .

12.

Balasubramaniam, K. and Ji, Y. (1995). Guided wave analysis in inhomogeneous plates, In: Thompson, D. O. and Chimenti, D. E. (eds), Review of Progress in QNDE, Vol. 14, pp. 227-234, N.Y.: Plenum Press .

13.

Sullivan, R. , Balasubramaniam, K. and Bennett, A. G. (1996). Plate wave flow patterns for ply orientation imaging in fiber reinforced composites . Materials Evaluation, 54(4), 518-523 .

14.

Ji, Y. , Sullivan, R. and Balasubramaniam, K. (1996). Guided wave behavior analysis in multi-layered inhomogeneous anisotropic plates. In: Thompson, D. O. and Chimenti, D. E. (eds), Review of Progress in QNDE, Vol. 15, pp. 217-222, N.Y.: Plenum Press .

15.

Kak, A. C. and Slaney, M. (1988). Principles of Computerized Tomography, http://www.slaney.org/pct/pct-toc.html.

16.

Malyarenko, E. V. and Hinders, M. K. (2001). Ultrasonic Lamb wave diffraction tomography . Ultrasonics, 39, 269-281 .

17.

Malyarenko, E. V. and Hinders, M. K. (2001). Comparison of double cross-hole and fan beam Lamb wave ultrasonic tomography. In: Thompson, D. O. and Chimenti, D. E. (eds), Review of Progress in QNDE, Vol. 20, pp. 732-739, N.Y.: Plenum Press .

18.

Subbarao, P. M. V. , Munshi, P. and Muralidhar, K. (1996). Performance of iterative tomographic algorithms applied to non-destructive evaluation with limited data . NDT&E, 30(6), 359-370 .