Transparent, patient-specific vocal tract replicas are helpful in research and educational endeavors but challenging to procure. An accessible method for fabricating these models, improving on previously suggested processes, would make them more widely available.
Method
Detailed instructions for fabricating a transparent, patient-specific vocal tract model were addressed. The broad steps were (1) digitally reconstructing (patient-specific) vocal tract geometry, (2) producing a vocal tract mold (using methods such as three-dimensional [3D] printing), and (3) casting transparent material (such as silicone) around the vocal tract mold and removing the mold. The cavities remaining within the cast represented the exact geometry of the vocal tract.
Discussion
A combination of 3D printing and silicone casting can produce useful vocal tract replicas. Several simple changes to previous methods can improve consistency and reduce the labor and cost of production. Limitations and potential modifications to expand the applications of this method are discussed.
AharinejadSHLametschwandtnerA. Corrosion casting–A historical review. In Microvascular Corrosion Casting in Scanning Electron Microscopy: Techniques and Applications. New York: Springer-Verlag. 1992: 3-11. 10.1007/978-3-7091-9230-6
2.
AnnerelSClaessensTDegrooteJSegersPVierendeelsJ. Validation of a numerical FSI simulation of an aortic BMHV by in vitro PIV experiments. Med Eng Phys.2014;36(8):1014-1023. 10.1016/j.medengphy.2014.05.004
3.
AraiT. The replication of Chiba and Kajiyama’s mechanical models of the human vocal cavity. J Phonetic Soc Jpn.2001;5(2):31-38. 10.24467/onseikenkyu.5.2_31
4.
AraiT. Vocal-tract models and their applications in education for intuitive understanding of speech production. Acoust Sci Technol.2016;37(4):148-156. 10.1250/ast.37.148
5.
AraiT. Physical models of the human vocal tract with Gel-type material. Interspeech 2008, 9th Annual Conference of the International Speech Communication Association, 2008. 2651-2654. https://splab.net/papers/2008/2008_10.pdf
6.
ArnelaMGuaschOAlíasF. Effects of head geometry simplifications on acoustic radiation of vowel sounds based on time-domain finite-element simulations. J Acoust Soc Am.2013;134(4):2946-2954. 10.1121/1.4818756
7.
BlandinRArnelaMLaboissièreRPelorsonXGuaschOVan HirtumALavalX. Effects of higher order propagation modes in vocal tract like geometries. J Acoust Soc Am.2015;137(2):832-843. 10.1121/1.4906166
8.
ChengYSZhouYChenBT. Particle deposition in a cast of human oral airways. Aerosol Sci Technol.1999;31(4):286-300. 10.1080/027868299304165
9.
CroceCFodilRDurandMSbirlea-ApiouGCaillibotteGPaponJFBlondeauJRCosteAIsabeyDLouisB. In vitro experiments and numerical simulations of airflow in realistic nasal airway geometry. Ann Biomed Eng.2006;34(6):997-1007. 10.1007/s10439-006-9094-8
10.
DabbaghchianSArnelaMEngwallOGuaschO. Reconstruction of vocal tract geometries from biomechanical simulations. Int J Numer Method Biomed Eng.2019;35(2):e3159. 10.1002/cnm.3159
11.
DaiY-TChangC-PTuL-JHsuD-J. Development of a Taiwanese head model for studying occupational particle exposure. Inhalation Toxicol.2007;19(5):383-392. 10.1080/08958370601174792
12.
De ZélicourtDPekkanKKitajimaHFrakesDYoganathanAP. Single-step stereolithography of complex anatomical models for optical flow measurements. J Biomech Eng.2005;127(1):204-207. 10.1115/1.1835367
13.
DoorlyDTaylorDJFrankePSchroterRC. Experimental investigation of nasal airflow. Proc Inst Mech Eng, Part H: J Eng Med. 2008;222(4):439-453. 10.1243/09544119JEIM330
14.
FaizalWMGhazaliNNNBadruddinIAZainonMZYazidAAAliMAKhorCYIbrahimNBRaziRM. A review of fluid-structure interaction simulation for patients with sleep related breathing disorders with obstructive sleep. Comput Methods Programs Biomed.2019;180:105036. 10.1016/j.cmpb.2019.105036
15.
FarleyJThomsonSL. Acquisition of detailed laryngeal flow measurements in geometrically realistic models. J Acoust Soc Am.2011;130(2):EL82-86. 10.1121/1.3609125
16.
FordMDNikolovHNMilnerJSLownieSPDeMontEMKalataWLothFHoldsworthDWSteinmanDA. PIV-measured versus CFD-predicted flow dynamics in anatomically realistic cerebral aneurysm models. J Biomech Eng.2008;130(2):021015 . 10.1115/1.2900724
17.
GeogheganPHBuchmannNASpenceCJTMooreSJermyM. Fabrication of rigid and flexible refractive-index-matched flow phantoms for flow visualisation and optical flow measurements. Exp Fluids.2012;52(5):1331-1347. 10.1007/s00348-011-1258-0
HornungDELeopoldDAYoungentobSLSheehePRGagneGMThomasFDMozellMM. Airflow patterns in a human nasal model. Arch Otolaryngol-Head & Neck Surg. 1987;113(2):169-172. 10.1001/archotol.1987.01860020061013
20.
JinKKYoonJHChangHKTaeWNDaeBSHyangAS. Particle image velocimetry measurements for the study of nasal airflow. Acta Otolaryngol.2006;126(3):282-287. 10.1080/00016480500361320
21.
KellyJTAsgharianBKimbellJSWongBA. Particle deposition in human nasal airway replicas manufactured by different methods. Part I: inertial regime particles. Aerosol Sci Technol.2004;38(11):1063-1071. 10.1080/027868290883360
22.
MittalRErathBDPlesniakMW. Fluid dynamics of human phonation and speech. Annu Rev Fluid Mech.2013;45:437-467. 10.1146/annurev-fluid-011212-140636
23.
MylavarapuGMurugappanSMihaescuMKalraMKhoslaSGutmarkE. Validation of computational fluid dynamics methodology used for human upper airway flow simulations. J Biomech.2009;42(10):1553-1559. 10.1016/j.jbiomech.2009.03.035
24.
RollinsMOrenL. Aerodynamic flow variables as a function of velopharyngeal gap size. Proceedings of Meetings on Acoustics. 2019;36:060001. 10.1121/2.0001022
25.
SchroeterJDTewksburyEWWongBAKimbellJS. Experimental measurements and computational predictions of regional particle deposition in a sectional nasal model. J Aerosol Med Pulm Drug Deliv.2015;28(1):20-29. 10.1089/jamp.2013.1084
26.
SoodtTSchröderFKlaasMVan OverbrüggenTSchröderW. Experimental investigation of the transitional bronchial velocity distribution using stereo scanning PIV. Exp Fluids.2012;52(3):709-718. 10.1007/s00348-011-1103-5
27.
StoiberMSchlöglhoferTAignerPGraslCSchimaH. An alternative method to create highly transparent hollow models for flow visualization. Int J Artif Organs.2013;36(2):131-134. 10.5301/ijao.5000171
28.
StoryBHTitzeIRHoffmanEA. Vocal tract area functions from magnetic resonance imaging. J Acoust Soc Am.1996;100(1):537-554. 10.1121/1.415960
29.
Van HirtumAPelorsonXEstienneOBaillietH. Experimental validation of flow models for a rigid vocal tract replica. J Acoust Soc Am.2011;130(4):2128-2138. 10.1121/1.3631631
30.
VermeulenMClaessensTVan Der SmissenBVan HolsbekeCSde BackerJWVan RansbeeckP. Manufacturing of patient-specific optically accessible airway models by fused deposition modeling. Rapid Prototyp J.2013;19(5):312-318. 10.1108/RPJ-11-2011-0118
31.
WarnkenZNSmythHDCDavisDAWeitmanSKuhnJGWilliamsRO. Personalized medicine in nasal delivery: the use of patient-specific administration parameters to improve nasal drug targeting using 3D-printed nasal replica casts. Mol Pharm.2018;15(4):1392-1402. 10.1021/acs.molpharmaceut.7b00702
32.
ZhangYFinlayWH. Experimental measurements of particle deposition in three proximal lung bifurcation models with an idealized mouth-throat. J Aerosol Med.2005;18(4):460-473. 10.1089/jam.2005.18.460
