To enable emission-free flight, the use of hydrogen as an energy carrier in aircraft is one possible solution. However, hydrogen storage is a challenging task. The current paper presents a design study for a light aircraft wing with highly integrated load-bearing hydrogen tanks using an automated optimization method by means of Evolutionary Algorithms. With this method, both preliminary investigations and a more detailed design of structural wing concepts with highly integrated hydrogen vessels were carried out.
TurgutETRosenMA. Partial substitution of hydrogen for conventional fuel in an aircraft by utilizing unused cargo compartment space. Int J Hydrog Energy2010; 35(3): 1436–1473.
WestenbergerAvan HoltenAllidieres, et al.Liquid hydrogen fuelled aircraft-system analysis CRYOPLANE Report No. GRD1-1999-10014. Brussels, Belgium: The European Commission, 2003.
13.
KalloJRathkePFladeS, et al.Antares DLR-H2 - flying test bed for development of aircraft fuel cell systems. Columbus, OH: Fuel Cell Seminar, 2013. [Cited 2022 Mar 25]. Available from: https://elib.dlr.de/85057/
14.
RomeoGDanziFCestinoE, et al.Design and optimization of a composite vessel for hydrogen storage subject to internal pressure and in-flight loads for UAVs. Int J Aerosp Sci2013; 2(3): 124–137.
15.
ZornW. Holm für Flugzeugtragflächen. Patent DE000000298615A, 1917.
16.
Hannoversche Waggonfabrik Akt. Ges. Rohrförmiger Flügelholm aus Metall für Flugzeuge. Patent DE000000383238A, 1923.
HieblMPongratzH. Höhenluftfahrzeug, Luftfahrzeugverband und Verfahren zum Betreiben eines Luftfahrzeugverbands. Patent DE102011116841A1, 2013.
21.
APUS Aeronautical Engineering GmbHScheffelP. Integraler hochdruckröhrentank für flugzeugtragflächen- (“TUBESTRUCT”) grundidee ist eine zu einzelröhren aufgelöste struktur eines tragflügels, wobei die röhren sowohl unter hohem Innendruck belastet sind, als auch schub- und torsionslasten aus beanspruchungen im fluge aufnehmen können. Die röhren können wasserstoff, methan oder andere flüchtige gase aufnehmen, 2017. [Cited 2020 Dec 17]. Available from: https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=DE102015008178A1&xxxfull=1
22.
KalettaP. Ein beitrag zur effizienzsteigerung evolutionärer algorithmen zur optimalen auslegung von faserverbundstrukturen im flugzeugbau. Dresden, Germany: Technische Universität Dresden. Dissertation, 2006.
23.
DexlFHauffeAWolfK. Multidisciplinary multi-objective design optimization of an active morphing wing section. Struc Multidiscipli Optim2020; 62(5): 2423–2440.
RivardETrudeauMZaghibK. Hydrogen storage for mobility: a review. Materials2019; 12(12): 1973.
27.
Regulation No 134 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of motor vehicles and their components with regard to the safety-related performance of hydrogen-fuelled vehicles (HFCV)[2019/795]. Available from:http://data.europa.eu/eli/reg/2019/795/oj
28.
EASA. Certification specifications for normal-category aeroplanes (CS-23) and acceptable means of compliance and guidance material to the certification specifications for normal-category aeroplanes (AMC& GM toCS-23). CS-23Cologne, Germany: European Union Aviation Safety Agency, 2020. Amendment 5/AMC & GM to CS-23 Issue 3.
29.
RödlAWulfCKaltschmittM. Chapter 3 - assessment of selected hydrogen supply chains—factors determining the overall GHG emissions. Hydrogen supply chains. San Diego, USA: Academic Press, 2018, pp. 81–109.
30.
SeegerJ. Ein beitrag zur numerischen strukturauslegung aktiver rotorblätter unter berücksichtigung der wechselwirkung von strömung und struktur. Dissertation. Dresden, Germany: Technische Universität Dresden, 2012.
31.
MarkselMPrapotnik BrdnikA. Maximum take-off mass estimation of a 19-seat fuel cell aircraft consuming liquid hydrogen. Sustainability2022; 14(14): 8392.
