Design and development of submerged arc welding fluxes using TiO 2 -SiO 2 -CaO and SiO 2 -CaO-Al 2 O 3 flux system

Abstract

Submerged arc welding is widely used in pipeline manufacturing due to higher efficiency as compared to the other welding processes. In present study, TiO₂-SiO₂-CaO and SiO₂-CaO-Al₂O₃–based submerged arc welding fluxes were developed for joining of linepipe steel. Twenty-one fluxes were formulated based on mixture design methodology. Fluxes were analysed using X-ray florescence (XRF), thermogravimetric, differential-scanning calorimetry, Hot-disc and X-ray diffraction (XRD) techniques. The structural behaviour of rutile basic fluxes were analysed using Fourier transformed infrared spectroscopy (FTIR). Thermo-gravimetric analysis and differential scanning calorimetry were performed from 25 ℃ to 900 ℃ in order to determine the thermal stability and change in enthalpy of fluxes. Thermal conductivity, thermal diffusivity and specific heat of each flux were evaluated by hot disc technique. The density and grain fineness number for flux particles was evaluated at room temperature. Multi objective optimisation was performed to derive the optimised flux formulations. Individual effect of all the mixture constituents is rarely observed on the physicochemical properties of fluxes as compared to the binary and ternary mixture effects. The binary compositions significantly affect the density. TiO₂-CaO is the most effective binary mixture which has increasing effect on density while all remaining binary mixture constituents have decreasing effect. The weight loss of fluxes observed during thermogravimetric analysis is affected by binary and ternary mixture constituents. Both binary and ternary flux mixtures affect change in enthalpy observed during differential scanning calorimetry. SiO₂.Al₂O₃ is the only most effective binary mixture constituent of flux having increasing effect on thermal conductivity. Binary mixture constituents TiO_2.CaF₂, SiO₂.Al₂O₃ and CaO.Al₂O₃ are the most effective and having synergistic effect on thermal diffusivity.

Keywords

Rutile basic flux system submerged arc welding fluxes agglomeration physicochemical properties thermophysical properties mixture design

Get full access to this article

View all access options for this article.

References

Sindo

. Welding metallurgy, Madison USA: Wiley-Interscience; University of Wisconsin, 1987.

Samuels

. Light microscopy odcarbon steels, Ohio, USA: ASM International, 1999, 82.

Jastrzębska

Szczerba

Stoch

et al.

Effect of electrode coating type on the physico-chemical properties of slag and welding technique. Biuletyn Instytutu Spawalnictwa 2015; 1: 37–46.

Singh

Khan

Siddiquee

. Review on effect of flux composition on its behavior and bead geometry in submerged arc welding (SAW). J Mech Eng Res 2013; 5: 123–127.

Indacochea

Blander

Christensen

et al.

Chemical reactions during submerged arc welding with FeO-MnO-SiO₂ fluxes. Metallurg Transact B 1985; 16B: 237–245.

Lau

Weatherly

Lean

. The sources of oxygen and nitrogen contamination in submerged arc welding using CaO-Al2O3 based fluxes. Weld Res Suppl 1985; 22: 343–348.

Vaz

Bracarense

Felizardo

et al.

Impermeable low hydrogen covered electrodes: weld metal, slag, and fumes evaluation. J Mater Res Technol 2012; 1: 64–70.

Jastrzębski R, Padula H, Trześniewski K, et al. Steering algorithms of the root pass and the face for pressure high strength carbon steel and stainless steel pipes using the flux cored welding wire. In: 6th European conference on welding, cutting and joining technologies EUROJOIN 6, Santiago de Compostela, 28–30 June 2006, pp.363–373.

Jastrzębski

. Technika i technologia spawania elektrodą otuloną. Dozór Techniczny 2013; 5: 105–120.

10.

Singh

Khan

Siddiquee

et al.

Effect of CaF2, FeMn and NiO additions on impact strength and hardness in submerged arc welding using developed agglomerated fluxes. J Alloys Compound 2016; 667: 158e169–158e169.

11.

Plessis

Toit

Pistorius

. Control of diffusible weld metal hydrogen through flux chemistry modification. Weld J 2007; 86: 273–280.

12.

Kanjilal

Pal

Majumdar

. Combined effect of flux and welding parameters on chemical composition and mechanical properties of submerged arc weld metal. J Mater Process Technol 2006; 171: 223–231.

13.

Burke

Indacochea

Olson

. The effects of welding flux additions on 4340 steel weld metal composition. Weld J 1990; 69: 115e122–115e122.

14.

Kanjilal

Pal

Majumdar

. Prediction of elements transfer in submerged arc welding. Weld J 2007; 86: 135e146–135e146.

15.

Singh

Khan

Siddiquee

et al.

Effect of flux composition on the percentage elongation and tensile strength of welds in submerged arc welding. Archive Mech Eng 2016; LXIII: 338–354.

16.

Singh

Khan

Siddiquee

. Effect of minor additives on bead geometry and shape relationship using submerged arc welding fluxes. J Manuf Sci Prod 2015; 15: 183–196.

17.

North

Bell

Nowicki

et al.

Slag/metal interaction, oxygen and toughness in submerged arc welding. Suppl Weld J 1978; 229: 63s–75s.

18.

Eagar

. Sources of weld metal oxygen contamination during submerged arc welding. Weld Res Suppl 1978; 22: 76-s–80-s.

19.

Palm

. How fluxes determine the metallurgical properties of submerged welds. Weld J 1972; 51: 358s–360s.

20.

Jindal

Chhibber

Mehta

. Investigation on flux design for submerged arc welding of high strength low-alloy steel. J Eng Manuf 2013; 227: 383–395.

21.

Anderson

McLean

. Design of experiments: a realistic approach, New York, NY: Marcell Dekker, 1974.

22.

Cornell

. Experiments with mixtures: designs, models and the analysis of mixture data, 3rd ed. New York, NY: John Wiley & Sons, 2002.

23.

Bhandari

Chhibber

Arora

et al.

Investigation of TiO₂-SiO₂-CaO-CaF₂ based electrode coatings on weld metal chemistry and mechanical behaviour of bimetallic weld. J Manuf Process 2016; 23: 61–74.

24.

Bhandari

Chhibber

Arora

et al.

Investigations on design and formulation of buttering layer electrode coatings for bimetallic welds. Mater Sci Forum 2017; 880: 37–40.

25.

Bhandari D, Chhibber R, Arora N, et al. Investigations on weld metal chemistry and mechanical behaviour of bimetallic welds using CaO–CaF2–SiO2–Ni based electrode coatings. Proc IMechE, Part L: J Materials: Design and Applications. Epub ahead of print 12 December 2016. DOI: 10.1177/1464420716677316.

26.

Eriksson

Pelton

. Critical evaluation and optimization of thermodynamic properties and phase diagrams of the CaO-Al₂O_3, Al₂O₃-SiO₂ and CaO-SiO₂-Al₂O₃ systems. Met Mater Trans B 24 1993, pp. 807–816.

27.

Nakayama

Horita

Sakagami

et al.

Effect of powder shape and size on mechanical properties of Al thin plate formed by compression shearing method at room temperature. Proc Eng 2014; 81: 1163–1168.

28.

De Vries

Roy

Osborn

. Phase equilibria in the system CaO-TiO₂-SiO₂. J Ceram Soc 1955; 38: 158–171.

29.

Davis MLE and Coe FR. The chemistry of submerged arc welding fluxes. The Welding Institute Research Report, 39/1977/M, London, May 1977, pp.1–61.

30.

Kim

Frost

Olson

et al.

Effect of electrochemical reactions on submerged arc weld metal compositions. Weld J 1990; 69: 446–453.

31.

Jindal

Chhibber

Mehta

. Modeling flux chemistry for submerged arc weldments of high strength low-alloy steel. J Eng Manuf 2014; 228: 1259–1259.

32.

Dallam

Liu

Olson

. Flux composition dependence of microstructure and toughness of submerged arc HSLA weldments. Weld J 1985; 64: 140–151.

33.

Sridhar S and Mills KC. Break temperatures of mould fluxes and their relevance to continuous casting. Ironmaking and steelmaking 2000; 27: 238–242.

34.

Mills

Fox

et al.

A review of slag splashing. ISI J Int 2005; 45: 619/633–619/633.

35.

Mills K. Estimation of slag properties. Southern African Pyrometallurgy (Short course), March 2011, Department of materials, Imperial College, UK, 1-56.

36.

Mills KC and Seethharaman S. Fundamentals of metallurgy. Abington, UK; Woodhead Publishing, 2005.

37.

Kerstan

Müller

Rüssel

. Binary, ternary and quaternary silicates of CaO, BaO and ZnO in high thermal expansion seals for solid oxide fuel cells studied by hightemperature X-ray diffraction (HT-XRD). Mater Res Bull 2011; 46: 2456–2463.

38.

Tarlakov

Es’kova

Shevyakov

. Spectroscopic study of high silica glasses of the lithium oxide-sodium oxidecalcium oxide-silicon dioxide system. Issled Strukt Sostyaniya Neorg Veshchestu 1974; 1: 7–10.

39.

Kaur

Kumar

Arora

et al.

Influence of Y2O3 on structural and optical properties of SiO2– BaO–ZnO–xB2O3–(10−x) Y2O3 glasses and glass ceramics. J Non-Crystal Solid 2011; 357: 858–863.

40.

Garai

Sasmal

Molla

et al.

Structural effects of Zn+2/Mg+2 ratios on crystallization characteristics and microstructure of fluorophlogopite mica-containing glassceramics. Solid State Sci 2015; 44: 10–21.

41.

Garai

Sasmal

Molla

et al.

Effects of nucleating agents on crystallization and microstructure of fluorophlogopite mica-containing glassceramics. J Mater Sci 2014; 49: 1612–1623.

42.

Sowmya T and Sankaranarayanan SR. Spectroscopic analysis of slags—preliminary observations. In: VII International conference on molten slags fluxes and salts, Johannesburg: The South African Institute of Mining and Metallurgy, 2004.

43.

Derringer

Suich

. Simultaneous optimization of several response variables. J Qual Technol 1980; 12: 214–219.

44.

Harington

. The desirability function . Ind Qual Control 1965; 21: 494–498.

45.

Castello

Montgomery

. Modified desirability functions for multi response optimization. J Qual Technol 1996; 28: 337–345.