Precipitation-dependent corrosion analysis of heat treatable aluminum alloys via friction stir welding,a review

Abstract

Although the various advantages of novel Friction stir welding (FSW) process; the weld surfaces are subjected to various serious problems such as lower corrosion resistance, high susceptibility to stress corrosion cracking and poor joint fatigue strength due to complex material flow and severe plastic deformation during the welding process. Corrosion behaviour of friction stir welded (FSWed) precipitate strengthening Al alloys have significant impact on metallurgical and electrochemical properties of structures. In FSW of precipitate strengthening Al alloys the localized heat input and severe plastic deformation creating appreciable changes in microstructure and modifies the microchemistry and metallurgical characteristics of precipitates. The heterogeneous distribution of precipitates and precipitate free zones (PFZs) along the grain boundaries leads to variation in electrochemical behaviour across the weld zones and hence increasing the susceptibility of weld surface to various corrosion attacks such as intergranular corrosion, pitting corrosion, exfoliation corrosion, stress corrosion cracking and galvanic corrosion. However, the corrosion resistance of FSWed joints can be improved either by reducing the size or redissolve the coarsened precipitates within the joint or modifying the microchemistry by controlling the size, location and distribution of precipitates which largely determine the corrosion rate of the weld surfaces. Consequently, it is imperative to address the influence of material modifications during FSW on corrosion behaviour of weld surface. This review paper addresses the precipitate dependent corrosion behaviour of FSWed joints of heat treatable/precipitate strengthening Al alloys and the various effective methods either to reduce or eliminate the effect of corrosion attack in FSWed joints of heat treatable Al alloys.