The aim of this study is to model and optimize the cutting conditions for the cutting force (Fc) and average surface roughness (Ra) that result from the machining of high-alloy white cast iron (Ni-Hard). The hard turning experiments were carried out on a CNC lathe with ceramic and CBN inserts. Cutting tool material, cutting speed, feed rate and depth of cut were chosen as the cutting conditions (control factors). Taguchi’s L18 orthogonal array was used for design of experiment. Optimum levels of the cutting conditions were determined using signal-to-noise (S/N) ratio, which was calculated for machining output variables (Fc and Ra) according to the ‘the-smaller-the-better’ approach. The effects of the cutting conditions on machining output variables were evaluated by the analysis of variance. The analysis of variance results showed that the depth of cut and feed rate were the most significant factors on Fc and Ra, respectively. Besides, the optimal cutting conditions for main cutting force and surface roughness were found at the different levels.
DavisJR. Classification and basic metallurgy of cast irons, Ohio: ASM Handbook, ASM International Materials Park, 1996, pp. 3–15.
2.
LiuJLiSManY. Wear resistance of Ni-Hard 4 and high-chromium cast iron re-evaluated. Wear1993; 166(1): 37–40.
3.
YaoMPageNW. Friction measurement on Ni-Hard 4 during high pressure crushing of silica. Wear2001; 249(1–2): 117–126.
4.
RohrigK. Ni-hard material data and applications, Canada: Nickel Development Institute, 1996, pp. 1–28.
5.
MasoodSHArmitageKBrandtM. An experimental study of laser-assisted machining of hard-to-wear white cast iron. Int J Mach Tools Manuf2011; 51(6): 450–456.
6.
DurejaJSGuptaVKSharmaVS. Wear mechanisms of coated mixed-ceramic tools during finish hard turning of hot tool die steel. Proc IMechE, Part C: J Mechanical Engineering Science2010; 224(1): 183–193.
7.
AslantasKUcunI. The performance of ceramic and cermet cutting tools for the machining of austempered ductile iron. Int J Adv Manuf Technol2009; 41(7–8): 642–650.
8.
OliveiraAJDinizAEUrsolinoDJ. Hard turning in continuous and interrupted cut with PCBN and whisker-reinforced cutting tools. J Mater Process Technol2009; 209(12–13): 5262–5270.
9.
BouachaKYalleseMAMabroukiT. Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool. Int J Refract Metals Hard Mater2010; 28(3): 349–361.
10.
SahinYMotorcuAR. Surface roughness model in machining hardened steel with cubic boron nitride cutting tool. Int J Refract Metals Hard Mater2008; 26(2): 84–90.
11.
ÇaydasU. Machinability evaluation in hard turning of AISI 4340 steel with different cutting tools using statistical techniques. Proc IMechE, Part B: J Engineering Manufacture2010; 224(7): 1043–1055.
12.
KountanyaRK. Optimizing PCBN cutting tool performance in hard turning. Proc IMechE, Part B: J Engineering Manufacture2008; 222(8): 969–980.
13.
DavimJPFigueiraL. Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques. Mater Design2007; 28(4): 1186–1191.
14.
AslanECamuşcuNBirgörenB. Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3+TiCN mixed ceramic tool. Mater Design2007; 28(5): 1618–1622.
15.
KacalAGulesinM. Determination of optimal cutting conditions in finish turning of austempered ductile iron using Taguchi design method. J Sci Ind Res2011; 70(4): 278–283.
16.
TaguchiGChowdhurySWuY. Taguchi's quality engineering handbook, New Jersey: John Wiley & Sons, 2005, pp. 503–505.
17.
ZhangJZChenJCKirbyED. Surface roughness optimization in an end-milling operation using the Taguchi design method. J Mater Process Technol2007; 184(1–3): 233–239.
18.
GologluCSakaryaN. The effects of cutter path strategies on surface roughness of pocket milling of 1.2738 steel based on Taguchi method. J Mater Process Technol2008; 206(1–3): 7–15.
19.
KurtMBagciEKaynakY. Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling progress. Int J Adv Manuf Technol2009; 40(5–6): 458–469.
20.
YücelE. Optimization of machinability parameters on high alloyed white cast irons (Ni-Hard) by Taguchi method, MSc Thesis, Karabük University, Turkey, 2011.
21.
GünayMKorkutIAslanE. Experimental investigation of the effect of cutting tool rake angle on main cutting force. J Mater Process Technol2005; 166(1): 44–49.
22.
KountanyaRAl-ZkeriIAltanT. Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel. J Mater Process Technol2009; 209(11): 5068–5076.
23.
HuaJShivpuriRChengX. Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer+hone cutting edge geometry. Mater Sci Eng A2005; 394(1–2): 238–248.
24.
SinghDRaoPV. A surface roughness prediction model for hard turning process. Int J Adv Manuf Technol2007; 32(11–12): 1115–1124.
25.
GrzesikWZakK. Modification of surface finish produced by hard turning using superfinishing and burnishing operations. J Mater Process Technol2012; 212(1): 315–322.
26.
RossPJ. Taguchi techniques for quality engineering, New York: McGraw-Hill, 1996, pp. 181–196.
