This article investigates an asymmetrical parallel mechanism with one universal–prismatic–spherical limb and two universal–spherical limbs and focuses on its mobility, configuration and dexterity analysis. The mobility analysis via screw theory reveals the mechanism of mobility four and leads to kinematic analysis. Mechanism configuration is then revealed with its model and actuation scheme. This leads to the singularity analysis and in particular to a new expression of direct kinematic near-singularity in an extended four-dimensional representation. Numerical analysis of local dexterity, which is illustrated with the change of platform position parameters, presents the range of better dexterous space.
StewartD. A platform with six degrees of freedom. Proc IMechE Part I: J Syst Control Eng1965; 180(15): 371–386.
2.
GanDLiaoQDaiJS. Forward displacement analysis of the general 6-6 Stewart mechanism using Gröbner bases. Mech Mach Theory2009; 44: 1640–1647.
3.
Dai JS, Sodhi C and Kerr DR. Design and analysis of a new six-component force transducer based on the Stewart platform for robotic grasping. In: Proceeding of the Second Biennial European Joint Conference on Engineering Systems Design and Analysis, London, England, 4–7 July 1994, vol. 64(8-3), pp.809–817. New York: ASME.
4.
Gosselin CM. Parallel computational algorithms for the kinematics and dynamics of parallel manipulators. In: Proceeding of IEEE International Conference on Robotics and Automation, Atlanta, GA, 2–6 May 1993, vol. 1, pp. 883–888. Washington, DC: IEEE.
5.
DaiJSKerrDR. A six-component contact force measurement device based on the Stewart platform. J Mech Eng Sci2000; 214(C5): 687–697.
6.
KongXGosselinCM. Type synthesis of 3-DOF spherical parallel manipulators based on screw theory. ASME J Mech Des2004; 126: 101–108.
7.
HuntKH. Structural kinematics of in-parallel-actuated robot-arms. ASME J Mech Trans Automat Des1982; 105: 705–712.
GanDDaiJSLiaoQ. Mobility change in two types of metamorphic parallel mechanisms. ASME J Mech Rob2009; 1: 01007_1–01007_9.
12.
TsaiLWJoshiS. Kinematics and optimization of a spatial 3-UPU parallel manipulator. ASME J Mech Des2000; 122: 439–446.
13.
SunTSongYMLiuLS. Dimensional synthesis of a 3-DOF parallel manipulator based on dimensionally homogeneous Jacobian matrix. Sci China Technol Sci2010; 53(1): 168–174.
GosselinCMZhangD. Stiffness analysis of parallel mechanisms using a lumped model. Int J Rob Autom2002; 17(1): 17–27.
16.
Di GregorioRParenti-CastelliV. Dynamics of a class of parallel wrists. ASME J Mech Des2004; 126(3): 436–441.
17.
SagliaJATsagarakisNGDaiJS. Inverse-kinematics-based control of a redundantly actuated platform for rehabilitation. Proc IMechE Part I: J Syst Control Eng2009; 223(1): 53–70.
18.
SternheimF. Computation of the direct and inverse kinematic model of the delta 4 parallel robot. Robotersysteme1987; 3: 199–203.
19.
Clavel R. Delta, a fast robot with parallel geometry. In: Proceeding of the 18th International symposium on industrial robots, Lausanne, Switzerland, 26–28 April 1988, pp.91–100. London: IFS Publications.
20.
KongXGosselinCM. Kinematics and singularity analysis of a novel type of 3-CRR 3-DOF translational parallel manipulator. Int J Rob Res2002; 21(9): 791–798.
21.
SagliaJADaiJSGaldwellDG. Geometry and kinematic analysis of a redundantly actuated parallel mechanism that eliminates singularities and improves dexterity. ASME J Mech Des2008; 130(12): 124501_1–124501_5.
22.
ZhangKDaiJSFangY. Topology and constraint analysis of phase change in the metamorphic chain and its evolved mechanism. ASME J Mech Des2010; 132(12): 121001_1–121001_11.
23.
ZarkandiS. Kinematics and singularity analysis of a parallel manipulator with three rotational and one translational DOFs. Mech Based Des Struct Mach2011; 39: 392–407.
24.
Gallardo-AlvaradoJRamírez-AgundisARojas-GarduñoH. Kinematics of an asymmetrical three-legged parallel manipulator by means of the screw theory. Mech Mach Theory2010; 45: 1013–1023.
LuYHuB. Analysis of kinematics and solution of active/constrained forces of asymmetric 2UPU+X parallel manipulators. Proc IMechE Part C J Mech Eng Sci2006; 220: 1819–1830.
27.
RefaatSHervéJMNahavandiS. Asymmetrical three-DOFs rotational-translational parallel-kinematics mechanisms based on Lie group theory. Eur J Mech A Solids2006; 25(3): 550–558.
28.
GanDMLiaoQZDaiJS. Forward displacement analysis of a new 1CCC-5SPS parallel mechanism using Grobner theory. Proc IMechE Part C J Mech Eng Sci2009; 223(C5): 1233–1241.
29.
GanDMDaiJSCaldwellDG. Constraint-screw system based synthesis of limb arrangement of the 3-PUP parallel mechanism. In: LenarcicJStanisicMM (eds) Advances in robot kinematics: motion in man and machine, Vol. 8. Dordrecht: Springer, 2010, pp. 485–492.
30.
ZhaoJSZhouKFengZJ. A theory of degrees of freedom for mechanisms. Mech Mach Theory2004; 39: 621–643.
