Smooth tool path generation for five-axis flank milling using multi-objective programming

Abstract

Flank milling provides an efficient way to machine turbo-machinery components. However, the trajectory smoothness is seldom considered in the existing tool positioning strategies. In this paper, the tool trajectory is smoothed with a constraint on the resulting geometric error for five-axis flank milling. Unlike existing methods, this new method simultaneously considers the geometric smoothness and geometric deviation. The geometric smoothness is characterized by the strain energy of the cutter axis trajectory surface (S_A). The geometric deviation is measured by the signed maximal orthogonal distance between the design surface (S_D) and the tool envelope surface (S_E). For finish and semi-finish flank millings, smooth tool path optimizations are then modelled as multi-objective programming (MOP) problems. Given a prescribed geometric tolerance, the MOP problems are reformulated as constrained nonlinear programming (NLP) problems. Based on the Taylor expansions of the strain energy and the signed distance on the differential deformation of S_A, the constrained NLP problems are solved efficiently by the sequential quadratic programming (SQP) method. The existence of the optimal solutions is also discussed. The validity of the approach is confirmed by two numerical examples that generate five-axis flank milling tool paths with cylindrical and conical cutters, respectively.

Keywords

flank milling tool trajectory smoothness tool orientation machining error multi-objective programming

References

Makhanov

S. S.

Munlin

Optimal sequencing of rotation angles for five-axis machining. Int. J.Adv. Manuf. Technol, 2007, 35(1-2), 41–54.

M. C.

Hwang

Y. R.

C. H.

Five-axis toolorientation smoothing using quaternion interpolation algorithm. Int. J. Machine Tool Manuf., 2003, 43(12), 1259–1267.

Jun

C. S.

Cha

Lee

Y. S.

Optimizing tool orientations for 5-axis machining by configuration-space search method. Comput.-Aided Des, 2003, 35(6), 549–566.

Zhang

L. P.

Nee

A. Y. C.

Fuh

J. Y. H.

An efficient cutter contact curve tool path regeneration algorithm for sculptured surface machining. Proc. IMechE, Part B: J. Engng Manuf., 2004, 218(4), 389–402.

Langeron

J. M.

Duc

Lartigue

Bourdet

A new format for 5-axis tool path computation, using Bspline curves. Comput.-Aided Des, 2004, 36(12), 1219–1229.

Wang

Tang

Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath. Comput.-Aided Des, 2007, 39(10), 841–852.

Castagnetti

Duc

Ray

The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation. Comput.-Aided Des, 2008, 40(9), 938–950.

Yin

Huang

Xiong

Tool path generation based on angle-based flattening. Proc. IMechE, Part B: J. Engng Manuf., 2009, 224(10), 1503–1509.

Q. Z.

Wang

Y. H.

Ding

A GPU-based algorithm for generating collision-free and orientation-smooth five-axis finishing tool paths of a ball-end cutter. Int. J. Prod. Res, 2010, 48(4), 1105–1124.

10.

Liu

X. W.

Five-axis NC cylindrical milling of sculptured surfaces. Comput.-Aided Des, 1995, 27(12), 887–894.

11.

Monies

Redonnet

J. M.

Rubio

Lagarrigue

Improved position of a conical mill for machining ruled surfaces: Application to turbine blades. Proc. IMechE, Part B: J. Engng Manuf., 2000, 214(B), 625–634.

12.

Menzel

Bedi

Mann

Triple tangent flank milling of ruled surfaces. Comput.-Aided Des, 2004, 36(3), 289–296.

13.

Chiou

C. J.

Accurate tool position for five-axis ruled surface machining by swept envelope approach. Comput.-Aided Des, 2004, 36(10), 967–974.

14.

Lartigue

Duc

Affouard

Tool path deformation in 5-axis flank milling using envelope surface. Comput.-Aided Des, 2003, 35(4), 375–382.

15.

Gong

Cao

L. X.

Liu

Improved positioning of cylindrical cutter for flank milling ruled surfaces. Comput.-Aided Des, 2005, 37(12), 1205–1213.

16.

Gong

Wang

Optimize tool paths of flank milling with generic cutters based on approximation using the tool envelope surface. Comput.-Aided Des, 2010, 41(12), 981–989.

17.

Bera

T. C.

Desai

K. A.

Rao

P. V. M.

On milling of thin-walled tubular geometries. Proc. IMechE, Part B: J. Engng Manuf., 2010, 224(12), 1804–1816.

18.

Ding

Zhu

L. M.

Global optimization of tool path for five-axis flank milling with a cylindrical cutter. Sci. Chin. E, 2009, 52(8), 2449–2459.

19.

Zhu

L. M.

Zheng

Ding

Xiong

Y. L.

Global optimization of tool path for five-axis flank milling with a conical cutter. Comput.-Aided Des, 2010, 42(10), 903–910.

20.

Zhu

L. M.

Xiong

Z. H.

Ding

Xiong

Y. L.

A distance function based approach for localization and profile error evaluation of complex surface. Trans. ASME, J. Manuf. Sci. Engng, 2004, 126(3), 542–554.

21.

Zhu

L. M.

Zhang

X. M.

Zheng

Ding

Analytical expression of the swept surface of a rotary cutter using the envelope theory of sphere congruence. Trans. ASME, J. Manuf. Sci. Engng, 2009, 131(4), 041017.

22.

Pechard

P.-Y.

Tournier

Lartigue

Geometrical deviations versus smoothness in 5-axis high-speed flank milling. Int. J. Machine Tools Manuf., 2009, 41(12), 918–929.

23.

S. M.

Y. F.

Zhu

Modifying theshape of NURBS surfaces with geometric constraints. Comput.-Aided Des, 2001, 33(12), 903–912.

24.

Park

Lofted B-spline surface interpolation by linearly constrained energy minimization. Comput.-Aided Des, 2003, 35(14), 1261–1268.

25.

Zhang

C. M.

Zhang

P. F.

Cheng

F. H.

Fairing spline curves and surfaces by minimizing energy. Comput.-Aided Des, 2001, 33(13), 913–923.

26.

Pourazady

Direct manipulations of NURBS surfaces subjected to geometric constraints. Comput. Graphics, 2006, 30(4), 598–609.

27.

Wang

Cheng

Barsky

Energy and B-spline interproximation. Comput.-Aided Des, 1997, 29(7), 485–496.

28.

Marler

R. T.

Arora

J. S.

Survey of multi-objective optimization methods for engineering. Struct. Multidisc. Optim., 2004, 26(6), 369–395.