In recent years the use of thermoplastic materials for primary aircraft structures has increased due to the benefits they offer in terms of reduced structural weight and improved payload. This work is a detailed assessment of the potential application of thermoplastic composites for a transverse floor beam. A number of beam sections were designed and manufactured from APC-2 material and subjected to a variety of tests. In all the areas investigated, significant developments have been made and important lessons learned.
1. Anglin, J. M."Boeing Commercial Airplane Company, Aircraft Applications,'"Engineering Handbook of Composites, Elsevier, pp. 801-809.
2.
2. Cogswell, F. N.1992. "Why Thermoplastic Structural Composites?" in Thermoplastic Aromatic Polymer Composites, Butterworth-Heinemann Ltd.
3.
3. Kuno, J. K. 1986. "Growth of the Advance Composites Industry in the 1980s'31st International SAMPE Symposiwn, Northrop Corporation, pp. 725-737.
4.
4. Brown, A. S.1990. "Thermoplastic Composites-Material of the 90s?"Aerospace America, pp. 28-33, January.
5.
5. Cogswell, F. N.1992. "The Applications of Thermoplastic Structural Composites," in Thermoplastic Aromatic Polymer Composites, Butterworth-Heinemann Ltd.
7. Griffiths, G. R., W. D. Hillier and J. A. S. Whiting. 1989. "Thermoplastic Composite Manufacturing Technology for a Flight Standard Tailplane,"SAMPE Journal, Westland PLC, 5(3):29-33.
8.
8. Bates, W. F.1992. "New Materials Drive High Performance Aircraft,"Aerospace America, Alan S. Brown, ed., pp. 46-49, September.
9.
9. McMahon, P. E.1984. "Thermoplastic Carbon Fibre Composites," in Development in Reinforced Plastics-4, G. Pritchard, ed., pp. 1-30.
10.
10. Murtagh, A. M., M. R. Monaghan and P. J. Mallon. 1994. "Investigation of the Interply Slip Process in Continuous Fibre Thermoplastic Composites,"Proceedings ICCM-9, Madrid, July.
11.
11. Mallon, P. and C. M. O'Bradaigh. 1988. "Development of a Pilot Autoclave for Polymeric Diaphragm Formng of Continuous Fibre Reinforced Thermoplastics,"Composites, Vol 19, No. 1, January.
12.
12. Monaghan, M. R., C. M. O'Bradaigh, P. J. Mallon and R. B. Pipes. 1990. "The Effect of Diaphragm Stiffness on the Quality of Diaphragm Formed Thermoplastic Composite Components,"Proc. 35th Int. SAMPE Symposium, Anaheim, CA.
13.
13. Dvorak, G. J. 1990. "Inelastic Deformation in Composite Materials,"IUTAM Symposium, Troy, New York, May 29-June 1.
14.
14. Roychowdhury, S., J. W. Gillespie, Jr. and S. G. Advani. 1992. "Void Formation and Growth in Thermoplastic Processing,"Proceedings 3rd Int. Conf on Computer Aided Design in Composite Material Technology (CADCOMP 92), University of Delaware, Newark, DE, May 13-15.
15.
15. Okine, R. K.1989. "Analysis of Forming Parts from Advanced Thermoplastic Composite Sheet Materials,"Journal of Thermoplastic Composite Materials, Vol 2, January.
