A Non-Isothermal Process Model for Consolidation and Void Reduction during In-Situ Tow Placement of Thermoplastic Composites

Abstract

In in-situ composites processing, heat and pressure are applied locally to composite tows to achieve consolidation. During the consolidation of thermoplastic composite tows or plies, a modest amount of flow takes place. Due to the high viscosity of thermoplastics, the fibers and the matrix move together. We propose a novel approach to model this process-approximate the medium as a compressible viscous continuum rather than use Darcy's law which has been successful in modeling thermoset composites processing. The void content of the composite changes during the consolidation process due to various mechanisms. A consolidation model for thermoplastic composite that incorporates—the relevant void growth and transport phenomena has been developed. The model is capable of predicting the final void fraction and the final thickness of a composite part as a function of the processing speed and the consolidation pressure under non-isothermal conditions.

Keywords

thermoplastic composites consolidation mechanics void compression on-line consolidation

Get full access to this article

View all access options for this article.

References

1. Dara, P. H. and A. C. Loos . 1985. "Thermoplastic Matrix Composite Processing Model," Center for Composite Materials and Structures, Report CCMS-85-10, VPI-E-85-21, Blacksburg, VA: V. P. I. S. U.

2. Lee, W.I. and G. S. Springer . 1987. "A Model of the Manufacturing Process of Thermoplastic Matrix Composites," Journal of Composite Materials, 21:1017.

3. Springer, G. S. and W. I. Lee . 1988. "Processing Models for Thermoplastic Matrix Composites," 33rd International SAMPE Symposium, March 7-10, p. 661.

4. Astrom, B. T. and R. B. Pipes . 1991. "Modeling of a Thermoplastic Pultrusion Process," SAMPE Quarterly, July, p. 55.

5. Lee, W. I. , G. S. Springer and F. N. Smith . 1991. "Pultrusion of Thermoplastics," 36th International SAMPE Symposium, April 15-18, p. 1309.

6. Van West, B. P. , R. B. Pipes and S. G. Advani . 1991. "The Consolidation of Commingled Thermoplastic Fabrics," Polymer Composites, 12(6):417.

7. Balasubramanyam, R. R. S. Jones and A. B. Wheeler . 1989. "Modelling Transverse Flows of Reinforced Thermoplastic Composite Materials," Composites, 20(1):33.

8. Barnes, J. A. and F. N. Cogswell . 1989. "Transverse Flow Processes in Continuous Fibre-Reinforced Thermoplastic Composites," Composites, 20(1):38.

9. Arefmanesh, A. , S. G. Advani and E. E. Michealides . 1989. "Numerical Study of Bubble Growth During Low Pressure Structural Foam Mold Filling Process: ANTEC 89-47th Annual Technical Conference of SPE, p. 883.

10.

10. Barone, M. R. and D. A. Caulk . 198& "Mechanics of Compression Molding," The Manufacturing Science of Composites, Proceedings of Manufacturing International, Volume IV, edited by T. G. Gutowski .

11.

11. Rogers, T. G. 1989. "Squeezing Flow of Fibre-Reinforced Viscous Fluids," J. big. Math., 23:81.

12.

12. Mantell, S. C. and G. S. Springer . 1992. "Manufacturing Process Models for Thermoplastic Composites," Journal of Composite Materials, 26(16):2348.