Green plasticizers from waste cooking oil catalytically modified by g-C 3 N 4 /graphene nanocatalysts: Implications for structure and performance of PVC
Restricted accessResearch articleFirst published online 2026
Green plasticizers from waste cooking oil catalytically modified by g-C 3 N 4 /graphene nanocatalysts: Implications for structure and performance of PVC
Growing environmental concerns associated with phthalate plasticizers have accelerated the development of sustainable alternatives derived from renewable resources. Herein, waste cooking oil (WCO) was catalytically tailored using g-C3N4/graphene nanostructures to regulate intermolecular interactions within poly (vinyl chloride) (PVC). The influence of nanomodification on mechanical performance, thermal stability, migration resistance, and solvent durability was systematically investigated and quantitatively correlated to structure–property relationships. Among the prepared systems, the g-C3N4/graphene-modified plasticizer (P1) produced PVC films with the highest tensile strength (6.95 MPa) and Young’s modulus (890 MPa) while maintaining adequate flexibility (elongation ≈230%). Thermal analysis revealed delayed degradation with an onset temperature near 250°C, indicating restricted chain improved thermal stability. Migration measurements showed a noticeable reduction (≈3.5%), approaching the behavior of the commercial DOP reference. FTIR and SEM analyses suggest improved interfacial compatibility between PVC and the modified plasticizer, as evidenced by C = O band shifts (5–9 cm−1) and a more uniform, compact morphology with reduced microvoids. The improved performance is attributed to increased polarity, stronger dipole interactions, and reduced free volume arising from epoxy functionalities and nano-induced physical networking. This work provides direct experimental evidence linking nano-assisted chemical tailoring of waste-derived oils to suppression of plasticizer mobility and enhancement of thermo-mechanical stability. The proposed strategy offers a scalable pathway toward safer and more sustainable PVC materials.
FengGHuLMaY, et al.An efficient bio-based plasticizer for poly (vinyl chloride) from waste cooking oil and citric acid: synthesis and evaluation in PVC films. J Clean Prod2018; 189: 334–343. https://doi.org/10.1016/j.jclepro.2018.04.085
2.
SuzukiAHBotelhoBGOliveiraLS, et al.Sustainable synthesis of epoxidized waste cooking oil and its application as a plasticizer for polyvinyl chloride films. Eur Polym J2018; 99: 142–149. https://doi.org/10.1016/j.eurpolymj.2017.12.014
3.
LiFDingTLiJ, et al.Molecular-level mechanisms in amide-based porous polymers for selective copper adsorption: a DFT study with environmental applications. Environ Res2025; 288: 123261. https://doi.org/10.1016/j.envres.2025.123261
4.
BensalahJThakurAKumarA. Investigating the adsorption processes of polymer resins for the removal of micropollutants: a comprehensive review in the field of environmental remediation. Environ Res2024; 254: 119128. https://doi.org/10.1016/j.envres.2024.119128
5.
FooWHKoaySSNChiaSR, et al.Recent advances in the conversion of waste cooking oil into value-added products: a review. Fuel2022; 324: 124539. https://doi.org/10.1016/j.fuel.2022.124539
SabiGJSimoesALGorupLF, et al.Production of benzyl-based esters from used soybean cooking oil as renewable plasticizers for flexible PVC films: exploring new applications for lipases in emerging technologies. Int J Biol Macromol2025; 292: 139233. https://doi.org/10.1016/j.ijbiomac.2024.139233
8.
SabiGJSimoesALGomesRA, et al.Production of environmentally friendly plasticizers derived from soybean oils using biochemical (lipases) and chemical catalysts–performance in flexible PVC films. Process Biochemistry2025; 154: 63–74. https://doi.org/10.1016/j.procbio.2025.04.013
9.
TanJZhangSLuT, et al.Design and synthesis of ethoxylated esters derived from waste frying oil as anti-ultraviolet and efficient primary plasticizers for poly (vinyl chloride). J Clean Prod2019; 229: 1274–1282. https://doi.org/10.1016/j.jclepro.2019.04.395
10.
AzzenaUMonteneroACarraroM, et al.Recovery, purification, analysis and chemical modification of awaste cooking oil. Waste Biomass Valorization2023; 14(1): 145–157. https://doi.org/10.1007/s12649-022-01845-3
11.
AkhundzadaHVKhankishiyevaRMammadovaG, et al.Advancements and environmental impacts of plasticizers: a comprehensive review of current trends and sustainable alternatives. J Thermoplast Compos Mater2026: 08927057261427394. https://doi.org/10.1177/08927057261427394
12.
CárdenasJOrjuelaASánchezDL, et al.Pre-treatment of used cooking oils for the production of green chemicals: a review. J Clean Prod2021; 289: 125129. https://doi.org/10.1016/j.jclepro.2020.125129
13.
TanJLiuBFuQ, et al.Role of the oxethyl unit in the structure of vegetable oil-based plasticizer for PVC: an efficient strategy to enhance compatibility and plasticization. Polymers2019; 11(5): 779. https://doi.org/10.3390/polym11050779
14.
MannuAGarroniSIbanez PorrasJ, et al.Available technologies and materials for waste cooking oil recycling. Processes2020; 8(3): 366. https://doi.org/10.3390/pr8030366
15.
FooWHKoaySSNTangDYY, et al.Safety control of waste cooking oil: transforming hazard into multifarious products with available pre-treatment processes. Food Mater Res2022; 2(1): 1–11. https://doi.org/10.48130/fmr-2022-0001
16.
AwogbemiOVon KallonDVAigbodionVS, et al.Advances in biotechnological applications of waste cooking oil. Case Stud Chem Environ Eng2021; 4: 100158. https://doi.org/10.1016/j.cscee.2021.100158
17.
ShahSKGaoY. Synergistic enhancement of asphalt mixtures with novel high-elastic modifiers and waste cooking oil. J Thermoplast Compos Mater2025: 08927057251406192. https://doi.org/10.1177/08927057251406192
18.
PatnaikSBeheraAParidaK. A review on g-C3N4/graphene nanocomposites: multifunctional roles of graphene in the nanohybrid photocatalyst toward photocatalytic applications. Catal Sci Technol2021; 11(18): 6018–6040. https://doi.org/10.1039/d1cy00784j
19.
KianiMParvanehVAbbasiM, et al.Fabrication and investigation of the mechanical properties of PVC/Carbon fiber/graphene nanocomposite pipes for oil and gas applications. J Thermoplast Compos Mater2022; 35(9): 1263–1278. https://doi.org/10.1177/0892705720930792
20.
AlhanishAAbu GhaliaM. Developments of biobased plasticizers for compostable polymers in the green packaging applications: a review. Biotechnol Prog2021; 37(6): e3210. https://doi.org/10.1002/btpr.3210
21.
EdoGINdudiWAliAB, et al.Poly (vinyl chloride)(PVC): an updated review of its properties, polymerization, modification, recycling, and applications. J Mater Sci2024; 59(47): 21605–21648. https://doi.org/10.1007/s10853-024-10471-4
LiuDShenYWaiPT, et al.An efficient plasticizer based on waste cooking oil: structure and application. J Appl Polym Sci2021; 138(13): 50128. https://doi.org/10.1002/app.50128
ShiWShuKSunH, et al.Dual enhancement of capturing photogenerated electrons by loading Co P nanoparticles on N-deficient graphitic carbon nitride for efficient photocatalytic degradation of tetracycline under visible light. Sep Purif Technol2020; 246: 116930. https://doi.org/10.1016/j.seppur.2020.116930
26.
ThongpinCSantaviteeOSombatsompopN. Degradation mechanism and mechanical properties of PVC in PVC‐PE melt blends: effects of molecular architecture, content, and MFI of PE. J Vinyl Addit Technol2006; 12(3): 115–123. https://doi.org/10.1002/vnl.20079
27.
LuPHuXLiY, et al.Novel CaCO3/g-C3N4 composites with enhanced charge separation and photocatalytic activity. J Saudi Chem Soc2019; 23(8): 1109–1118. https://doi.org/10.1016/j.jscs.2019.07.002
28.
IzadpanahRRezaeiMTalebiS. Preparation of cross-linked PVC-g-(St-MA) copolymer/organoclay nanocomposites and investigation of chemical characteristics, morphology, thermal, and mechanical properties. J Thermoplast Compos Mater2022; 35(2): 211–229. https://doi.org/10.1177/0892705719886011
29.
ZhangZJiangPLiuD, et al.Research progress of novel bio-based plasticizers and their applications in poly(vinyl chloride). J Mater Sci2021; 56: 10155–10182. https://doi.org/10.1007/s10853-021-05934-x
30.
SakuldeemeekiatTLuamsriNWootthikanokkhanJ, et al.The effects of thermochromic pigments on optical, mechanical, and heat insulation properties of plasticized PVC window film. J Thermoplast Compos Mater2020; 33(9): 1196–1216. https://doi.org/10.1177/0892705718820392
31.
KrauskopfLG. How about alternatives to phthalate plasticizers. J Vinyl Addit Technol2003; 9(4): 159–171. https://doi.org/10.1002/vnl.10079
32.
HammicheDBenslimaneABoukerrouA. Mechanical properties of PVC composites and nanocomposites. InPoly (vinyl chloride) based composites and nanocomposites. Cham: Springer International Publishing, 2023, pp. 261–273.
33.
ÖzsinGKılıçMKırbıyık KurukavakÇ, et al.Thermal characteristics, stability, and degradation of PVC composites and nanocomposites. Poly (Vinyl Chloride) Based Composites and Nanocomposites 2023. Cham: Springer International Publishing, pp. 293–318.
34.
ZhangXPZhaoJWangXH, et al.Highly efficient flame-retardant plasticizers for flexible poly (vinyl chloride) via the synergism of integrated isocyanurate, DOPO and poly (ε-caprolactone). Chem Eng J2025; 510: 161658. https://doi.org/10.1016/j.cej.2025.161658
35.
Travieso-RodriguezJAJerez-MesaRLlumàJ, et al.Mechanical properties of 3D-printing polylactic acid parts subjected to bending stress and fatigue testing. Materials2019; 12(23): 3859. https://doi.org/10.3390/ma12233859
36.
LiYZhuHZhangZ, et al.Plasticized polyvinyl chloride: from material properties to flexible applications. Adv Colloid Interface Sci2024; 337: 103384. https://doi.org/10.1016/j.cis.2024.103384
37.
FarihaSIslamMSRockshatM, et al.Advances in PVC-Based blend nanocomposites. ECS J Solid State Sci Technol2023; 12(12): 121005. https://doi.org/10.1149/2162-8777/ad145a
38.
TomaszewskaJSterzyńskiTWoźniak-BraszakA, et al.Review of recent developments of glass transition in PVC nanocomposites. Polymers2021; 13(24): 4336. https://doi.org/10.3390/polym13244336
