Enhancing reactivity-controlled compression ignition engine performance: A response surface methodology approach with ammonium hydroxide-waste cooking oil biodiesel optimization

Abstract

The focus on ammonium hydroxide, biodiesels and their combustion technology has garnered significant attention in pursuing carbon-neutral and carbon-free fuels to address greenhouse gas emissions (GHG) and mitigate global warming. Low-temperature combustion (LTC) has been introduced as an alternative method to conventional compression ignition (CI) combustion. Reactivity controlled compression ignition (RCCI) can be achieved by introducing highly reactive waste cooking oil methyl ester (WCOME) oil directly into the manifold in intervals of 10% energy and injecting low-reactive ammonium hydroxide at 20%–50%. Utilizing the response surface methodology (RSM) approach, it was determined that for optimal operation in RCCI mode, an ideal ammonium hydroxide energy sharing (AHES) of 43% would account for the varying parameters and their effects on emissions and performance. The results of the experiments predicted a brake thermal efficiency (BTHE) of 34.85% and a brake specific energy consumption (BSEC) of 10.69 MJ/kWh. Meanwhile, a notable decrease in exhaust emissions was observed for HC, CO, CO₂, NO _x and smoke by 41.54%, 38.89%, 48.89%, 51.27% and 65.80% respectively when compared to conventional biodiesel combustion (CBC). The experimental result at maximum load operation with an AHES of 50% indicates that RCCI combustion led to an increase in thermal efficiency from 30.36% to 35.42%, and the in-cylinder pressure and heat release rate dropped from 83.42 bar to 59.64 bar and 78.68 kJ to 60.92 kJ, respectively. There was a significant reduction in HC, CO, CO₂, NO _x and smoke emissions recorded as 58.76 ppm, 0.11%v, 1.61%v, 442 ppm and 6.64 N, respectively, compared to CBC.